データシートサーチシステム |
|
HCPL4502 データシート(PDF) 4 Page - Texas Instruments |
|
HCPL4502 データシート(HTML) 4 Page - Texas Instruments |
4 / 1 page 6N135, 6N136, HCPL4502 OPTOCOUPLERS/OPTOISOLATORS SOES022A – JULY 1986 – REVISED APRIL 1998 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 operating characteristics, VCC = 5 V, IF = 16 mA, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS 6N135 6N136, HCPL4502 UNIT PARAMETER TEST CONDITIONS MIN TYP MAX MIN TYP MAX UNIT BW Bandwidth (– 3 dB) RL = 100 Ω, See Note 7 2 2 MHz NOTE 7: Bandwidth is the range of frequencies within which the ac output voltage is not more than 3 dB below the low-frequency value. switching characteristics at VCC = 5 V, IF = 16 mA, TA = 25°C PARAMETER TEST CONDITIONS 6N135 6N136, HCPL4502 UNIT PARAMETER TEST CONDITIONS MIN TYP MAX MIN TYP MAX UNIT t † Propagation delay time low to high RL = 4.1 kΩ, See Figure 1 See Note 8, 1 1.5 µs tPLH† time, low-to-high- level output RL = 1.9 kΩ, See Figure 1 See Note 9, 0.6 0.8 µs t † Propagation delay time high to low RL = 4.1 kΩ, See Figure 1 See Note 8, 0.7 1.5 µs tPHL† time, high-to-low- level output RL = 1.9 kΩ, See Figure 1 See Note 9, 0.6 0.8 µs dV CM Common-mode input transient ∆VCM = 10 V, RL = 4.1 kΩ, See Figure 2 IF = 0, See Notes 8 and 10, 1000 V/ µs CM dt (H) immunity, high-level output ∆VCM = 10 V, RL = 1.9 kΩ, See Figure 2 IF = 0, See Notes 9 and 10, 1000 V/ µs dV CM Common-mode input transient ∆VCM = 10 V, See Notes 9 and 10, RL = 4.1 kΩ, See Figure 2 1000 V/ µs CM dt (L) immunity, low-level output ∆VCM = 10 V, See Notes 9 and 10, RL = 1.9 kΩ, See Figure 2 1000 V/ µs † JEDEC registered data for 6N135 and 6N136 NOTES: 8. The 4.1-k Ω load represents one LSTTL unit load of 0.36 mA and a 6.1-kΩ pullup resistor. 9. The 1.9-k Ω load represents one TTL unit load of 1.6 mA and a 5.6-kΩ pullup resistor. 10. Common-mode transient immunity, high-level output, is the maximum rate of rise of the common-mode input voltage that does not cause the output voltage to drop below 2 V. Common-mode input transient immunity, low-level output, is the maximum rate of fall of the common-mode input voltage that does not cause the output voltage to rise above 0.8 V. |
同様の部品番号 - HCPL4502 |
|
同様の説明 - HCPL4502 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |