データシートサーチシステム |
|
S242N100J502CT データシート(PDF) 6 Page - WALSIN TECHNOLOGY CORPORATION |
|
S242N100J502CT データシート(HTML) 6 Page - WALSIN TECHNOLOGY CORPORATION |
6 / 11 page Multilayer Ceramic Capacitors Approval Sheet Page 6 of 11 ASC Safety Certified X1/Y2_(S2)_010X_AS May. 2019 9. RELIABILITY TEST CONDITIONS AND REQUIREMENTS No. Item Standard Method Test Condition Requirements 1. Visual examination and Dimensions IEC 60384-1 4.1 * No remarkable defect. * Dimensions to confirm to individual specification sheet. 2. Capacitance IEC 60384-1 4.2.2 * Class I : (C0G) Cap. ≤1000pF, 1.0±0.2Vrms, 1MHz±10%. Cap.>1000pF, 1.0±0.2Vrms, 1KHz±10%. * Class II : (X7R) 1.0±0.2Vrms, 1KHz±10%. * Capacitance is within specified tolerance. * CR means rated capacitance for conform to the E6 series of preferred values given in IEC 60063. 3. D.F. (Dissipation Factor) Tangent of loos angle IEC 60384-1 4.2.3 Dielectric Q/D.F. Remark Class I (C0G) Q ≥1000 Cap. ≥30pF Q ≥400+20C Cap.<30pF Class II (X7R) D.F. ≤2.5% 4. Temperature Coefficient IEC 60384-21/22 4.6 With no electrical load. T.C. Operating Temp C0G(NP0) -55~125°C at 25°C X7R -55~125°C at 25°C T.C. Capacitance Change C0G(NP0) Within ±30ppm/℃ X7R Within ±15% 5. Voltage proof (Dielectric Strength) IEC 60384-14 4.2.1 * To apply voltage : X Capacitor : 1075Vdc (4.3UR). Y Capacitor : 1500Vac. * Duration : 60 sec. * The charge current shall not exceed 0.05A. * The voltage shall be raised from the near zero to the test voltage a rate not exceeding 150V(r.m.s.)/sec. * No evidence of damage or flash over during test. 6. Insulation Resistance IEC 60384-21/22 4.5.3 Rated Vol.(V) Apply Voltage Charge Current Charge Time >500 500Vdc ≤50mA 60 sec. Dielectric Requirements Class I (C0G) ≥100G or RxC≥1000 -F, whichever is smaller Class II (X7R) ≥10G or RxC≥500 -F, whichever is smaller 7. Solderability IEC 60384-21/22 4.10 * Solder temperature: 235±5°C(0201~1210). * Solder temperature: 245±5°C(1808~2225). * Dipping time : 2±0.5 sec. * 75% min. coverage of all metalized area. 8. Resistance to Soldering Heat IEC 60384-14 4.4 IEC 60384-21/22 4.9 * Solder temperature : 260±5°C. * Dipping time : 10±1 sec. * Preheating : 120 to 150°C for 1 minute before immerse the capacitor in a eutectic solder. * Measurement to be made after keeping at room temperature for 24±2 hrs. Dielectric I.R. Cap. Change Q/D.F. Class I (C0G) ≥1G Within ±2.5% or ±0.25pF, whichever is larger ≤100% of initial requireme nt Class II (X7R) ≥1G Within ±7.5% 9. Temperature Cycle IEC 60384-21/22 4.11 * Conduct the five cycles according to the temperatures and time. Step Temp.(°C) Time(min.) 1 Min. operating temp. +0/-3 30±3 2 Room temp. 2~3 3 Max.operating temp. +3/-0 30±3 4 Room temp. 2~3 * Measurement to be made after keeping at room temperature for 24±2 hrs. Dielectric I.R. Cap. Change Q/D.F. Class I (C0G) To meet initial require ment Within ±2.5% or ±0.25pF, whichever is larger ≤1.0(Q) × initial requirement Class II (X7R) Within ±7.5% ≤1.5(D.F.) × initial requirement |
同様の部品番号 - S242N100J502CT |
|
同様の説明 - S242N100J502CT |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |