TECHNICAL DATA

KK4060B

14-Stage Ripple-Carry Binary

Counter/Divider and Oscillator

High-Voltage Silicon-Gate CMOS

ORDERING INFORMATION

KK4060BN Plastic

KK4060BD SOIC

The KK4060B consists of an oscillator section and 14 ripple-carry

binary counter stages. The oscillator configuration allows design of either

RC or crystal oscillator circuits. A RESET input is provided which resets

the counter to the all-Q’s state and disables the oscillator. A high level on

the RESET line accomplishes the reset function. All counter stages are

master-slave flip-flops. The state of the counter is advanced one step in

binary order on the negative transition of OSC In (and OSC Out). Schmitt

trigger action on the input-pulse line permits unlimited input-pulse rise

and fall times.

• Operating Voltage Range: 3.0 to 18 V

• Maximum input current of 1 µA at 18 V over full package-temperature

range; 100 nA at 18 V and 25

°C

• Noise margin (over full package temperature range):

1.0 V min @ 5.0 V supply

2.0 V min @ 10.0 V supply

2.5 V min @ 15.0 V supply

PIN ASSIGNMENT

FUNCTION TABLE

Inputs

Outputs

Osc In

Reset

Q

L

No change

L

Advance to

next state

X

H

All Outputs

are low

X = don’t care

LOGIC DIAGRAM

PIN 8= GND

1