データシートサーチシステム |
|
TS952IPT データシート(PDF) 2 Page - STMicroelectronics |
|
TS952IPT データシート(HTML) 2 Page - STMicroelectronics |
2 / 17 page Absolute maximum ratings and operating conditions TS951-TS952-TS954 2/17 1 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings (AMR) Symbol Parameter Value Unit VCC Supply voltage (1) 1. All voltage values, except differential voltage are with respect to network ground terminal. 14 V Vid Differential input voltage (2) 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1V, the maximum input current must not exceed ±1mA. In this case (Vid > ±1V), an input series resistor must be added to limit input current. ±1 V Vin Input voltage (3) 3. Do not exceed 14V. VDD-0.3 to VCC+0.3 V Tstg Storage temperature range -65 to +150 Tj Maximum junction temperature 150 °C Rthja Thermal resistance junction to ambient (4) SOT23-5 SO-8 SO-14 TSSOP8 TSSOP14 4. Short-circuits can cause excessive heating and destructive dissipation. Rth are typical values. 250 125 103 120 100 °C/W Rthjc Thermal resistance junction to case (4) SOT23-5 SO-8 SO-14 TSSOP8 TSSOP14 81 40 31 37 32 °C/W ESD HBM: human body model(5) TS951 TS952 TS954 5. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a 1.5k Ω resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 1 2 3 kV MM: machine model(6) 6. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. 100 V CDM: charged device model(7) TS951 TS952 TS954 7. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. 1.5 1.5 1 kV Latch-up immunity 200 mA Lead temperature (soldering, 10sec) 260 °C |
同様の部品番号 - TS952IPT |
|
同様の説明 - TS952IPT |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |