データシートサーチシステム |
|
TS1872IPT データシート(PDF) 3 Page - STMicroelectronics |
|
TS1872IPT データシート(HTML) 3 Page - STMicroelectronics |
3 / 26 page TS1871-TS1872-TS1874 Absolute maximum ratings and operating conditions 3/26 1 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol Parameter Value Unit VCC Supply voltage(1) 7V Vid Differential input voltage(2) ±1 V Vin Input voltage VDD -0.3 to VCC +0.3 V Tstg Storage temperature -65 to +150 °C Tj Maximum junction temperature 150 °C Rthja Thermal resistance junction to ambient (3) SOT23-5 DIP8 DIP14 MiniSO-8 SO-8 SO-14 TSSOP8 TSSOP14 250 85 66 190 125 103 120 100 °C/W Rthjc Thermal resistance junction to case SOT23-5 DIP8 DIP14 MiniSO-8 SO-8 SO-14 TSSOP8 TSSOP14 81 41 33 39 40 31 37 32 °C/W ESD HBM: human body model(4) MM: machine model(5) CDM: charged device model(6) 2 200 1.5 kV V kV Latch-up immunity 200 mA Lead temperature (soldering, 10 sec) 250 °C Output short-circuit duration see note(7) 1. All voltage values, except differential voltage are with respect to network terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1V, the maximum input current must not exceed ±1mA. When Vid > ±1V, add an input series resistor to limit input current. 3. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. 4. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a 1.5k Ω resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 5. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. 6. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. 7. Short-circuits from the output to VCC can cause excessive heating. The maximum output current is approximately 80mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. |
同様の部品番号 - TS1872IPT |
|
同様の説明 - TS1872IPT |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |