TL071

Absolute maximum ratings and operating conditions

3/15

2

Absolute maximum ratings and operating conditions

Table 1.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

TL071M, AM, BM TL071I, AI, BI

TL071C, AC, BC

±18

V

±15

V

±30

V

Thermal resistance junction to

SO-8

DIP8

125

85

°C/W

Thermal resistance junction to

case(4) (5)

SO-8

DIP8

40

41

°C/W

Infinite

Operating free-air temperature range

-55 to +125

-40 to +105

0 to +70

°C

Storage temperature range

-65 to +150

°C

ESD

500

V

200

V

1500

V

1.

All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages

CC

2.

The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less.

3.

Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.

4.

Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuits on all

amplifiers.

5.

Rth are typical values.

6.

The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure

that the dissipation rating is not exceeded.

7.

Human body model: 100 pF discharged through a 1.5 k

Ω resistor between two pins of the device, done for all couples of pin

combinations with other pins floating.

8.

Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device

with no external series resistor (internal resistor < 5

Ω), done for all couples of pin combinations with other pins floating.

9.

Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to

the ground.

Table 2.

Operating conditions

Symbol

Parameter

TL071I, AI, BI

TL071C, AC, BC

Unit

Supply voltage

6 to 36

V

Operating free-air temperature range

-40 to +105

0 to +70

°C