© Freescale Semiconductor, Inc., 2006–2010. All rights reserved.

Freescale Semiconductor

Data Sheet: Advance Information

This document contains information on a new product. Specifications and information herein are subject to change without notice.

Document Number: MC13852

Rev. 2.0, 12/2010

MC13852

Package Information

Plastic Package: MLPD-8

2.0 x 2.0 x 0.6 mm

Case: 2128-01

Ordering Information

Device

Device Marking

Package

MC13852EP

852

MLPD-8

1

Introduction

The MC13852 is a cost-effective high gain LNA with

low noise figure. This is the lower application frequency

version of the MC13851.

An integrated bypass switch is included to preserve high

input intercept performance in variable signal strength

environments and boosts dynamic range. On-chip bias

circuitry offers low system cost. The input and output

match are external to allow maximum design flexibility.

The external resistor used to set device current enables

balancing required linearity with low current

consumption. Gain is optimized for applications

<1000 MHz.

The MC13852 is fabricated with an advanced RF

BiCMOS process using the eSiGe:C module and is

available in the 2

× 2 mm MLPD-8 leadless package,

offering a small, low height, easy-to-solder solution for

applications with tight printed circuit board placement

requirements.

MC13852

General Purpose Low Noise

Amplifier with Bypass Switch

Contents:

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Electrical Specifications . . . . . . . . . . . . . . . . . . .3

3 Applications Information . . . . . . . . . . . . . . . . . . . 8

4 Printed Circuit Board and Bills of Materials . . 14

5 Scattering and Noise Parameters . . . . . . . . . . . 18

6 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

7 Product Documentation . . . . . . . . . . . . . . . . . . . 28

8 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . 28