データシートサーチシステム |
|
TMPG06-18 データシート(PDF) 1 Page - Vishay Siliconix |
|
TMPG06-18 データシート(HTML) 1 Page - Vishay Siliconix |
1 / 5 page TMPG06-6.8 thru TMPG06-43A Vishay General Semiconductor Document Number: 88404 Revision: 09-Feb-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 PAR® Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. FEATURES • Junction passivation optimized design passivated anisotropic rectifier technology •TJ = 185 °C capability suitable for high reliability and automotive requirement • Available in uni-directional polarity only • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC MECHANICAL DATA Case: MPG06, molded epoxy over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end Notes: (1) Non-repetitive current pulse, per fig. 3 and derated above T A = 25 °C per fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum PRIMARY CHARACTERISTICS VBR 6.8 V to 43 V PPPM 400 W PD 1.0 W IFSM 40 A TJ max. 185 °C MPG06 MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Peak power dissipation with a 10/1000 µs waveform (1) (fig. 1) PPPM 400 W Peak pulse current with a 10/1000 µs waveform (1)(2) (fig. 3) IPPM See next table A Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) PD 1.0 W Peak forward surge current 8.3 ms single half sine-wave (2) IFSM 40 A Maximum instantaneous forward voltage at 25 A (2) VF 3.5 V Operating junction and storage temperature range TJ, TSTG - 65 to + 185 °C |
同様の部品番号 - TMPG06-18 |
|
同様の説明 - TMPG06-18 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |