データシートサーチシステム |
|
U1168A データシート(PDF) 4 Page - Agilent(Hewlett-Packard) |
|
U1168A データシート(HTML) 4 Page - Agilent(Hewlett-Packard) |
4 / 10 page 4 Electrical Specifications AC specifications True rms AC voltage and AC current specifications Function Range Resolution Accuracy ± (% of reading + counts of least significant digit) Burden voltage/ shunt 45 Hz to 500 Hz 500 Hz to 1 kHz Where (applicable) Voltage 600 mV 0.1 mV 1.0% + 3 2.0% + 3 NA 6 V 0.001 V 1.0% + 3 2.0% + 3 NA 60 V 0.01 V 1.0% + 3 2.0% + 3 NA 600 V 0.1 V 1.0% + 3 2.0% + 3 NA 600 (VZ LOW) 3 0.1 V 2.0% + 3 4.0% + 3 NA Current1 60 μA2 0.01 μA 1.5% + 3 NA < 2.5 V/1 kΩ 600 μA2 0.1 μA 1.5% + 3 NA < 2.5 V/1 kΩ 6 A3 0.001 A 1.5% + 3 NA < 0.2 V/0.005 Ω 10 A3, 4 0.01 A 1.5% + 3 NA < 0.4 V/0.005 Ω Notes for true rms ac voltage specifications: 1. Overload protection: 600 Vrms. For millivolt measurements, 600 Vrms for short circuits with < 0.3 A current. 2. Input impedance: 10 MΩ (nominal) in parallel with < 100 pF. 3. VZ LOW input impedance: 3 kΩ (nominal). Notes for ac current specifications: 1. AC current measurement not available for U1231A model. 2. Overload protection for 60 μA to 600 μA range: 600 Vrms for short circuits with < 0.3 A current. 3. Overload protection for 6 A to 10 A range: 11 A/1000 V; 10 × 38 mm fast-acting fuse. 4. Specification for 10 A range: 10 A continuous. Add 0.3% to the specified accuracy when measuring signals > 10 A to 20 A for 30 seconds maximum. After measuring currents > 10 A, cool down the multimeter for twice the duration of the measured time before proceeding with low current measurements. Capacitance specifications Range Resolution Accuracy± (% of reading + counts of least significant digit) Measuring rate (at full scale) U1231A/U1232A/U1233A 1000 nF 1 nF 1.9% + 2 4 times/second 10 μF 0.01 μF 1.9% + 2 4 times/second 100 μF 0.1 μF 1.9% + 2 4 times/second 1000 μF 1 μF 1.9% + 2 1 time/second 10 mF 0.01 mF 1.9% + 2 0.1 time/second Notes : 1. Overload protection: 600 Vrms for short circuits with < 0.3 A current. 2. The accuracy of for all ranges is specified based on a film capacitor or better, and after the Null function is used to subtract the test lead resistance and thermal effect (by shorting the test leads). 3. The maximum display is 1200 counts. |
同様の部品番号 - U1168A |
|
同様の説明 - U1168A |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |