データシートサーチシステム |
|
TC1302A データシート(PDF) 11 Page - Microchip Technology |
|
TC1302A データシート(HTML) 11 Page - Microchip Technology |
11 / 26 page 2003-2012 Microchip Technology Inc. DS21333C-page 11 TC1302A/B 4.0 TC1302B PIN DESCRIPTIONS The descriptions of the pins are listed in Table 4-1. TABLE 4-1: TC1302B PIN FUNCTION TABLE 4.1 Regulated Output Voltage #1 (VOUT1) Connect VOUT1 to the positive side of the VOUT1 capacitor and load. Capable of 300 mA maximum output current. For the TC1302B, VOUT1 can be turned ON and OFF using the SHDN1 input pin. 4.2 Circuit Ground Pin (GND) Connect GND to the negative side of the input and output capacitor. Only the LDO internal circuitry bias current flows out of this pin (200 µA maximum). 4.3 Reference Bypass Input By connecting an external 10 nF capacitor (typical) to the bypass input, both outputs (VOUT1 and VOUT2) will have less noise and improved Power Supply Ripple Rejection (PSRR) performance. The LDO output voltage startup time will increase with the addition of an external bypass capacitor. By leaving this pin unconnected, the startup time will be minimized. 4.4 Output Voltage #2 Shutdown (SHDN2) ON/OFF control is performed by connecting SHDN2 to its proper level. When this pin is connected to a voltage less than 15% of VIN, VOUT2 will be OFF. If this pin is connected to a voltage that is greater than 45% of VIN, VOUT2 will be turned ON. 4.5 Regulated Output Voltage #2 (VOUT2) Connect VOUT2 to the positive side of the VOUT2 capacitor and load. This pin is capable of a maximum output current of 150 mA. VOUT2 can be turned ON and OFF using SHDN2. 4.6 Unregulated Input Voltage Pin (VIN) Connect the unregulated input voltage source to VIN. If the input voltage source is located more than several inches away, or is a battery, a typical minimum input capacitance of 1 µF and 4.7 µF is recommended. 4.7 Output Voltage #1 Shutdown (SHDN1) ON/OFF control is performed by connecting SNDN1 to its proper level. When this pin is connected to a voltage less than 15% of VIN, VOUT1 will be OFF. If this pin is connected to a voltage that is greater than 45% of VIN, VOUT1 will be turned ON. Pin No. Name Function 1 NC No connect. 2VOUT1 Regulated output voltage #1, capable of 300 mA. 3 GND Circuit ground pin. 4 Bypass Internal reference bypass pin. A 10 nF external capacitor can be used to further reduce output noise and improve PSRR performance. 5 SHDN2 Output #2 shutdown control input. 6VOUT2 Regulated output voltage #2, capable of 150 mA. 7VIN Unregulated Input voltage pin. 8 SHDN1 Output #1 shutdown control input. |
同様の部品番号 - TC1302A_13 |
|
同様の説明 - TC1302A_13 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |