データシートサーチシステム |
|
TL072IYDT データシート(PDF) 3 Page - STMicroelectronics |
|
TL072IYDT データシート(HTML) 3 Page - STMicroelectronics |
3 / 16 page TL072, TL072A, TL072B Absolute maximum ratings and operating conditions Doc ID 2298 Rev 7 3/16 2 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol Parameter TL072I, AI, BI TL072C, AC, BC Unit VCC Supply voltage (1) 1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages where the zero reference level is the midpoint between VCC + and V CC -. ±18 V Vin Input voltage (2) 2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less. ±15 V Vid Differential input voltage (3) 3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. ±30 V Rthja Thermal resistance junction to ambient(4) SO-8 DIP8 4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short- circuits on all amplifiers. 125 85 °C/W Rthjc Thermal resistance junction to case (4) SO-8 DIP8 40 41 °C/W Output short-circuit duration (5) 5. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. Infinite Tstg Storage temperature range -65 to +150 °C ESD HBM: human body model(6) 6. Human body model: 100 pF discharged through a 1.5 k Ω resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 1kV MM: machine model(7) 7. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of pin combinations with other pins floating. 200 V CDM: charged device model(8) 8. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground. 1.5 kV Table 2. Operating conditions Symbol Parameter TL072I, AI, BI TL072C, AC, BC Unit VCC Supply voltage 6 to 36 V Toper Operating free-air temperature range -40 to +105 0 to +70 °C |
同様の部品番号 - TL072IYDT |
|
同様の説明 - TL072IYDT |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |