データシートサーチシステム |
|
M-V340 データシート(PDF) 2 Page - Epson Company |
|
M-V340 データシート(HTML) 2 Page - Epson Company |
2 / 3 page 2 SENSOR SECTION SPECIFICATION TA=25°C, VCC=3.3V, angular rate=0 deg/s, ≤±1G, unless otherwise noted. Parameter Test Conditions / Comments Min. Typ. Max. Unit GYRO SENSOR Sensitivity Dynamic Range - ±450 - - deg/s Sensitivity - 0.015 (deg/s)/LSB Temperature Coefficient 1 σ, −20°C ≤ T A ≤ +70°C - 10 - ppm/°C Nonlinearity Best fit straight line <±350dps - 0.1 - % of FS >±350dps - 0.5 - % of FS Misalignment 1 σ, Axis-to-axis, Δ = 90° ideal - ±0.1 - deg Bias Initial Error 1 σ - ±0.5 - deg/s Temperature Coefficient (Linear approximation) 1 σ, −20°C ≤ T A ≤ +70°C 0.001 (deg/s )/°C In-Run Bias Stability 1 σ - 7 - deg/hr Angular Random Walk 1 σ - 0.2 - deg/ hr Linear Acceleration Effect <0.01 (deg/s)/G Noise Noise Density 1 σ, f = 10 to 20 Hz, no filtering - 0.004 - (deg/s)/ Hz , rms Frequency Property 3 dB Bandwidth - - 180 - Hz ACCELEROMETERS Sensitivity Dynamic Range - ±6 - - G Sensitivity - 0.18 mG/LSB Temperature Coefficient 1 σ, −20°C ≤ T A ≤ +70°C - 100 - ppm/°C Nonlinearity ≤ 1G , Best fit straight line - TBD - % of FS Misalignment 1 σ, Axis-to-axis, Δ = 90° ideal - TBD - deg Bias Initial Error 1 σ - ±8 - mG Temperature Coefficient (Linear approximation) 1 σ, −20°C ≤ T A ≤ +70°C 0.02 mG/°C In-Run Bias Stability 1 σ - <0.1 - mG Velocity Random Walk 1 σ - <0.1 - (m/sec)/ hr Noise Noise Density 1 σ, f = 10 to 20 Hz, no filtering - TBD - mG/ Hz , rms Frequency Property 3 dB Bandwidth - - 180 - Hz TEMPERATURE SENSOR Scale Factor *1 Output = 1469 @ +25°C - -0.0053964 - °C/LSB *1) This is a reference value used for internal temperature compensation. We provide no guarantee that the value gives an absolute value of the internal temperature. Note) The values in the specifications are based on the data calibrated at the factory. The values may change according to the way the product is used. Note) The Typ values in the specifications are average values or 1 σ values. Note) Unless otherwise noted, the Max / Min values in the specifications are design values or Max / Min values at the factory tests. |
同様の説明 - M-V340 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |