UZK24.121, UZO24.121

U-Series

The terminals are IP20 Finger safe constructed and suitable for field- and factory wiring.

Signal and center tap terminals

Type

Screw terminals

Maximal wire size, solid wire

Maximal wire size, stranded wire

American Wire Gauge

AWG 26-14

Maximal wire diameter

1.5mm (including ferrules)

Wire stripping length

6mm / 0.25inch

Screwdriver

Slotted 3x0.5mm

Recommended tightening torque

0.45Nm, 4lb.in

Instructions:

a)

Follow national installation codes and installation regulations!

b)

Ensure that all strands of a stranded wire enter the terminal connection!

c)

Unused terminal compartments should be securely tightened.

d)

Ferrules are allowed.

Degree of protection

IP 00

According to EN/IEC 60529

Class of protection

III

According to EN/IEC 61140

Internal input fuse

35A

Replacement fuses must be of the same type or an UL

listed fuse with the same nominal value and

characteristics.

Isolation

1100Vac

Isolation voltage between power to chassis

Aug. 2017 / Rev. 2.0 DS-UZK24.121-EN

All parameters are typical values specified at, 25°C ambient temperature unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

7/11