ISL21070

FN7599 Rev 4.00

Page 10 of 12

September 3, 2015

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you have

the latest Rev.

DATE

REVISION

CHANGE

September 3, 2015

FN7599.4

Updated Ordering Information Table on page 2.

June 23, 2014

FN7599.3

• Updated POD with following changes:

In Detail A, changed lead width dimension from 0.13+/-0.05 to 0.085-0.19

Changed dimension of foot of lead from 0.31+/-0.10 to 0.38+/-0.10

In Land Pattern, added 0.4 Rad Typ dimension

In Side View, changed height of package from 0.91+/-0.03 to 0.95+/-0.07

April 4, 2011

FN7599.2

Converted to New Intersil Template

Updated page 1 description (removed 3.3V from last paragraph)

Updated “Features” on page 1 as follows:

-Removed 3.3V from Reference Output Voltage bullet.

-Removed "Initial Accuracy: 3.3V from 2.5V...±0.2% option"

-Removed “ISL21070-33 (Coming Soon)” under Input Voltage Range bullet

Updated “Ordering Information” on page 2 as follows:

-Removed ISL21070CIH333Z-TK 3.3V option

Updated “Electrical Specification” as follows:

-Removed 3.3V option electrical specification header and table

Updated Parameters Note in Electrical spec from “parameters...” to “compliance...”

April 19, 2010

FN7599.1

Added product variation for 0.6V and 2.048V. Removed 1.024V coming soon part. Updated throughout

accordingly as follows:

Updated page 1 description (removed 1.024V from last paragraph and added 0.6V)

Updated “Features” on page 1 as follows:

-removed 1.024V from Reference Output Voltage bullet. Added 0.600V.

-removed "Initial Accuracy: 1.024V . . .±0.5%" and added "Initial Accuracy: 0.600V . . ±1.0%"

-removed "Coming Soon" from ISL21070-20 under Input Voltage Range bullet. Also, removed ISL21070-10

(coming soon) part and added ISL21070-06 part.

-added "Tempco (0.600V only). . . . . 50ppm/°C"

-added "all others" to "Tempco (all others) . . . 30ppm/°C"

Updated “Ordering Information” on page 2 to add ISL21070DIH306Z-TK 0.6V option. Removed 1.024V option

ISL21070CIH310Z-TK

Added Note 4 to Part Marking column of “Ordering Information” on page 2.

-Added "Electrical Specifications (ISL21070-06, VOUT = 0.600V)" table to page 3 and "Electrical Specifications

(ISL21070-20, VOUT = 2.048V)" table to page 4

-Removed "Electrical Specifications (ISL21070-xx, VOUT = 1.024V to 2.048V)" table

Added Theta JC of 110 to “Thermal Information” on page 3. Added applicable Theta JC Note 7 (“For

JC, the

“case temp” location is taken at the package top center.”)

Revised Theta JA in “Thermal Information” on page 3 from 371 to 275

Added Figure 16. “VOUT NOISE, 0.1Hz TO 10Hz” to page 7.

March 19, 2010

FN7599.0

Initial release.