データシートサーチシステム |
|
FAN5308MPX データシート(PDF) 9 Page - Fairchild Semiconductor |
|
FAN5308MPX データシート(HTML) 9 Page - Fairchild Semiconductor |
9 / 11 page 9 www.fairchildsemi.com FAN5308 Rev. 1.0.1 Therefore, use wide traces for high current paths and place the input capacitor, the inductor, and the output capacitor as close as possible to the integrated circuit terminals. In order to mini- mize voltage stress to the device resulting from ever present switching spikes, use an input bypass capacitor with low ESR. Note that the peak amplitude of the switching spikes depends upon the load current; the higher the load current, the higher the switching spikes. The resistor divider that sets the output volt- age should be routed away from the inductor to avoid RF cou- pling. The ground plane at the bottom side of the PCB acts as an electromagnetic shield to reduce EMI. For more board layout recommendations download the applica- tion note “PCB Grounding System and FAN2001/FAN2011 High Performance DC-DC Converters” (AN-42036). |
同様の部品番号 - FAN5308MPX |
|
同様の説明 - FAN5308MPX |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |