MC10EP57DTG datasheet(1/11 Pages) ONSEMI

部品番号	MC10EP57DTG

部品情報	3.3V / 5V ECL 4:1 Differential Multiplexer

Download	11 Pages

Scroll/Zoom	100%

メーカー	ONSEMI [ON Semiconductor]

ホームページ	http://www.onsemi.com

Logo

1 / 11 page

December, 2006 − Rev. 12

1

Publication Order Number:

MC10EP57/D

MC10EP57, MC100EP57

3.3V / 5VECL 4:1

Differential Multiplexer

Description

The MC10/100EP57 is a fully differential 4:1 multiplexer. By

leaving the SEL1 line open (pulled LOW via the input pulldown

resistors) the device can also be used as a differential 2:1 multiplexer

with SEL0 input selecting between D0 and D1. The fully differential

architecture of the EP57 makes it ideal for use in low skew

applications such as clock distribution.

The SEL1 is the most significant select line. The binary number

applied to the select inputs will select the same numbered data input

(i.e., 00 selects D0).

Multiple VBB outputs are provided. The VBB pin, an internally

generated voltage supply, is available to this device only. For

single−ended input conditions, the unused differential input is

connected to VBB as a switching reference voltage. VBB may also

rebias AC coupled inputs. When used, decouple VBB and VCC via a

0.01

mF capacitor and limit current sourcing or sinking to 0.5 mA.

When not used, VBB should be left open.

The 100 Series contains temperature compensation.

Features

• 375 ps Typical Propagation Delays

• Maximum Frequency > 2 GHz Typical

• PECL Mode Operating Range:

VCC = 3.0 V to 5.5 V with VEE = 0 V

• NECL Mode Operating Range:

VCC = 0 V with VEE = −3.0 V to −5.5 V

• Open Input Default State

• Safety Clamp on Inputs

• Q Output will default LOW with inputs open or at VEE

• VBB Outputs

• Useful as Either 4:1 or 2:1 Multiplexer

• These are Pb−Free Devices

MARKING

DIAGRAM*

xxx

= MC10 or 100

A

= Assembly Location

L

= Wafer Lot

Y

= Year

W

= Work Week

G

= Pb−Free Package

http://onsemi.com

(Note: Microdot may be in either location)

See detailed ordering and shipping information in the package

dimensions section on page 8 of this data sheet.

ORDERING INFORMATION

*For additional marking information, refer to

Application Note AND8002/D.

TSSOP−20

DT SUFFIX

CASE 948E

XXXX

EP57

ALYWG

G

1

20

QFN−20

MN SUFFIX

CASE 485E

XXXX

EP57

ALYWG

G

同様の部品番号 - MC10EP57DTG

メーカー	部品番号	データシート	部品情報
ON Semiconductor	MC10EP57DTG	113Kb / 10P	ECL 4:1 Differential Multiplexer April, 2014 ??Rev. 13

More results

同様の説明 - MC10EP57DTG

メーカー	部品番号	データシート	部品情報
ON Semiconductor	MC100EP57	77Kb / 10P	3.3V / 5V ECL 4:1 Differential Multiplexer October, 2004 ??Rev. 9
Micrel Semiconductor	SY100EP57V	479Kb / 8P	3.3V/5V PECL/ECL 3GHz DIFFERENTIAL 4:1 MULTIPLEXER
ON Semiconductor	MC10EL57	124Kb / 8P	5V ECL 4:1 Differential Multiplexer November, 2006 ??Rev. 7
	MC10EP56	182Kb / 11P	3.3V / 5V ECL Dual Differential 2:1 Multiplexer December, 2006 ??Rev. 14
	NB100LVEP56	153Kb / 14P	2.5V / 3.3V / 5V ECL Dual Differential 2:1 Multiplexer December, 2004 ??Rev. 5
	MC10EP58	157Kb / 11P	3.3V / 5V ECL 2:1 Multiplexer December, 2006 ??Rev. 6
	MC100EP58	69Kb / 8P	3.3V / 5V ECL 2:1 Multiplexer June, 2001 ??Rev. 4
Micrel Semiconductor	SY100EP56V	478Kb / 8P	3.3V/5V PECL/ECL 3GHz DUAL DIFFERENTIAL 2:1 MULTIPLEXER
ON Semiconductor	MC10E457	167Kb / 9P	5V ECL Triple Differential 2:1 Multiplexer July, 2016 ??Rev. 9
ON Semiconductor	MC100EL56	117Kb / 6P	5V ECL Dual Differential 2:1 Multiplexer November, 2006 ??Rev. 7