データシートサーチシステム |
|
MC74LVXT8053DR2G データシート(PDF) 3 Page - ON Semiconductor |
|
MC74LVXT8053DR2G データシート(HTML) 3 Page - ON Semiconductor |
3 / 12 page MC74LVXT8053 http://onsemi.com 3 MAXIMUM RATINGS Symbol Parameter Value Unit VCC Positive DC Supply Voltage (Referenced to GND) –0.5 to + 7.0 V VIS Analog Input Voltage −0.5 to VCC + 0.5 V Vin Digital Input Voltage (Referenced to GND) –0.5 to VCC + 0.5 V I DC Current, Into or Out of Any Pin −20 mA PD Power Dissipation in Still Air, SOIC Package† TSSOP Package† 500 450 mW Tstg Storage Temperature Range –65 to + 150 °C TL Lead Temperature, 1 mm from Case for 10 Seconds 260 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. †Derating − SOIC Package: – 7 mW/ °C from 65°C to 125°C TSSOP Package: − 6.1 mW/ °C from 65°C to 125°C RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit VCC Positive DC Supply Voltage (Referenced to GND) 2.0 6.0 V VIS Analog Input Voltage 0.0 VCC V Vin Digital Input Voltage (Referenced to GND) GND VCC V VIO* Static or Dynamic Voltage Across Switch 1.2 V TA Operating Temperature Range, All Package Types –55 + 85 °C tr, tf Input Rise/Fall Time (Channel Select or Enable Inputs) VCC = 3.3 V ± 0.3 V VCC = 5.0 V ± 0.5 V 0 0 100 20 ns/V *For voltage drops across switch greater than 1.2 V (switch on), excessive VCC current may be drawn; i.e., the current out of the switch may contain both VCC and switch input components. The reliability of the device will be unaffected unless the Maximum Ratings are exceeded. DC CHARACTERISTICS − Digital Section (Voltages Referenced to GND) VCC Guaranteed Limit Symbol Parameter Condition VCC V −55 to 25 °C ≤85°C ≤125°C Unit VIH Minimum High−Level Input Voltage, Channel−Select or Enable Inputs Ron = Per Spec 3.0 4.5 5.5 1.2 2.0 2.0 1.2 2.0 2.0 1.2 2.0 2.0 V VIL Maximum Low−Level Input Voltage, Channel−Select or Enable Inputs Ron = Per Spec 3.0 4.5 5.5 0.53 0.8 0.8 0.53 0.8 0.8 0.53 0.8 0.8 V Iin Maximum Input Leakage Current, Channel−Select or Enable Inputs Vin = VCC or GND, 5.5 ± 0.1 ± 1.0 ± 1.0 mA ICC Maximum Quiescent Supply Current (per Package) Channel Select, Enable and VIS = VCC or GND; VIO = 0 V 5.5 4 40 160 mA This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high−impedance cir- cuit. For proper operation, Vin and Vout should be constrained to the range GND v (Vin or Vout) v VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open. |
同様の部品番号 - MC74LVXT8053DR2G |
|
同様の説明 - MC74LVXT8053DR2G |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |