データシートサーチシステム |
|
MC100EP140D データシート(PDF) 1 Page - ON Semiconductor |
|
MC100EP140D データシート(HTML) 1 Page - ON Semiconductor |
1 / 6 page © Semiconductor Components Industries, LLC, 2006 November, 2006 − Rev. 9 1 Publication Order Number: MC100EP140/D MC100EP140 3.3VECL Phase−Frequency Detector Description The MC100EP140 is a three state phase frequency−detector intended for phase−locked loop applications which require a minimum amount of phase and frequency difference at lock. Since the part is designed with fully differential internal gates, the noise is reduced throughout the circuit, especially at high speeds. The basic operation of a Phase/Frequency Detector (PFD) is to “compare” an incoming signal (feedback) to a set reference signal. When the Reference (R) and Feedback (FB) inputs are unequal in frequency and/or phase, the differential UP (U) and DOWN (D) outputs will provide pulse streams which, when subtracted and integrated, provide an error voltage for control of a VCO. Detector states of operation are shown in the Figure 2 and the State Table. The typical output amplitude of the EP140 is 400 mV, allowing faster switching time and greater bandwidth. For proper operation, the input edge rate of the R and FB inputs should be less than 5 ns. More information on Phase Lock Loop operation and application can be found in AND8040. The pinout is shown in Figure 1, the logic diagram in Figure 3, and the typical termination in Figure 5. Features • 500 ps Typical Propagation Delay • Maximum Frequency > 2.1 GHz Typical • Fully Differential Internally • Advanced High Band Output Swing of 400 mV • Transfer Gain: 1.0 mV/Degree at 1.4 GHz 1.2 mV/Degree at 1.0 GHz • Rise and Fall Time: 100 ps Typical • The 100 Series Contains Temperature Compensation • PECL Mode Operating Range: VCC = 3.0 V to 3.6 V with VEE = 0 V • NECL Mode Operating Range: VCC = 0 V with VEE = −3.0 V to −3.6 V • Open Input Default State • Pb−Free Packages are Available A = Assembly Location L = Wafer Lot Y = Year W = Work Week G = Pb−Free Package SOIC−8 D SUFFIX CASE 751 MARKING DIAGRAMS* http://onsemi.com *For additional marking information, refer to Application Note AND8002/D. See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. ORDERING INFORMATION 1 8 KP140 ALYW G 1 8 |
同様の部品番号 - MC100EP140D |
|
同様の説明 - MC100EP140D |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |