DESCRIPTION

The FC-6324 Fire Alarm Control panel is a proven, versa-

tile, six-zone control with space for an optional digital com-

municator. It meets the requirements of NFPA Standard 72

for Central Station, Protected Premises, and Remote

(DACT) Supervising Station Fire Alarm Systems. It is Listed

to UL Standard 864, inherently power limited and meets all

UL transient immunity requirements.

The many features of the FC-6324 control provide a cost

effective approach to systems design, and allow a great de-

gree of flexibility in one enclosure. These features include

six (6) Class B, Style B initiating circuits and three (3) Class

B, Style Y notification appliance circuits rated up to 2.5 amps

each with a system maximum of 2.5 amperes. Notification

appliance circuits can be configured as silenceable or

non-silenceable.

DIP switch programming is used throughout, eliminating

the need for computers and associated software.

A time delay of 30, 60, or 90 seconds is available for

waterflow switches.

The control is housed in a red steel enclosure with a win-

dow offering a view of LEDs displaying the status of vital

functions and allowing access to switches controlling system

operation. The surface mounted enclosure, with its slim ap-

pearance (3 3/8-inch depth) is designed to blend with any en-

vironment. Space is available for two (2) B-7R batteries.

Supervision of vital components, plug-in modules, func-

tional switches and standby batteries is provided.

The optional digital communicator includes a wide range

of selectable transmission formats to communicate to most

central stations. Other features of the communicator are: A

line-active indicator for each of two phone lines, “Kiss-Off”

signal LED, dual “low telephone voltage detect” circuitry,

and programmable event codes per format. The FC-6324

control is programmable for AC power loss delay required

for DACT operation.

A serial annunciator driver allows remote alarm annuncia-

tion to as many as four (4) Model FC-2866 remote annuncia-

tors.

Other optional modules include the FC-2880 I/O module

which provides 34 predefined open collector outputs that can

be used to drive LEDs or relays.

AGENCY APPROVALS

UL

S1869

CSFM

Approved

FEATURES

· Inherently Power Limited

· DIP Switch Programming

· Choice of Output Patterns Including

ANSI S3.41

· Programmable Time Delay for

Waterflow Switches

· Periodic Trouble Reminder

· Walk Test Feature

· Optional Digital Communicator with

Multiple Reporting Formats

· Serial Annunciator Output

· Surface Mount Technology

FC-6324

SIX ZONE PANEL

CONVENTIONAL FIRE ALARM CONTROL

16 Southwest Park, Westwood, MA 02090 USA TEL: (781) 471-3000 FAX: (781) 471-3099

Specifications are provided for information only, are not intended to be used for installation purposes, and are believed to be accurate. However, no responsibility is assumed by Fire Control In-

struments, Inc. for their use. Specifications subject to change without notice.

© 2000 All Rights Reserved

9020-0485/Ver. 1.6

An ISO 9001 Certified Company