データシートサーチシステム |
|
1N6282E3 データシート(PDF) 1 Page - Microsemi Corporation |
|
1N6282E3 データシート(HTML) 1 Page - Microsemi Corporation |
1 / 5 page Unidirectional & Bidirectional Transient Voltage Suppressors Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 Copyright © 2009 11-03-2009 Rev G; SA4-15 S C O T TS DALE DIVISION 1N6267 thru 1N6303A, e3 1.5KE6.8 thru 1.5KE400CA, e3 DESCRIPTION APPEARANCE The Transient Voltage Suppressor (TVS) series for 1N5908 & 1N6267-1N6303A are JEDEC registered selections for unidirectional devices. The popular series of 1.5KE6.8-1.5KE400CA offers similar voltages with an extended voltage range and also provides bidirectional options with a C or CA suffix. All have the same high Peak Pulse Power rating of 1500 W and extremely fast response time. They can protect from secondary lightning effects per IEC61000-4-5 and class levels described herein as well as inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS • Economical TVS series for thru-hole mounting • Available in both Unidirectional and Bidirectional (1.5KE series add C or CA suffix for Bidirectional) • Voltages from 6.8 to 400 V Breakdown (VBR) • Suppresses transients up to 1500 watts @ 10/1000 µs • Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55 oC to +125oC (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in the operating direction for unidirectional or both directions for bidirectional) • Options for screening in accordance with MIL-PRF- 19500 for JANTX are also available by adding MX prefix to the part number. • Surface mount equivalent packages are available as SMCJ5.0 - SMCJ170CA or SMCG5.0 - SMCG170CA (consult factory for other surface mount options) • Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B • RoHS Compliant devices available by adding “e3” suffix • Protection from switching transients and induced RF • Protection from ESD and EFT per IEC 61000-4-2 and IEC 61000-4-4 with fast response • Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1: 1.5KE6.8A to 1.5KE200A or CA * Class 2: 1.5KE5.0A to 1.5KE180A or CA * Class 3: 1.5KE5.0A to 1.5KE91A or CA * Class 4: 1.5KE5.0A to 1.5KE43A or CA * • Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1 : 1.5KE5.0A to 1.5KE110A or CA * Class 2: 1.5KE5.0A to 1.5KE56A or CA * Class 3: 1.5KE5.0A to 1.5KE27A or CA * Class 4: 1.5KE5.0A to 1.5KE13A or CA * • Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: 1.5KE5.0A to 1.5KE24A or CA * Class 3: 1.5KE5.0 to 1.5KE12A or CA * * Also applies to 1N5908 and 1Nxxxx of same voltage MAXIMUM RATINGS MECHANICAL AND PACKAGING • Peak Pulse Power dissipation at 25 ºC: 1500 watts at 10/1000 μs (also see Fig 1,2, and 3) • Impulse repetition rate (duty factor): 0.01% • tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional • Operating and Storage temperature: -65 ºC to +150ºC • Thermal Resistance: 22 ºC/W junction to lead at 3/8 inch (10 mm) from body, or 82 ºC/W junction to ambient when mounted on FR4 PC board with 4 mm 2 copper pads (1oz) and track width 1 mm, length 25 mm • Steady-State Power dissipation: 5 watts at TL = 40 oC, or 1.52 watts at TA = 25 ºC when mounted on FR4 PC board described for thermal resistance • Forward Surge: 200 Amps peak impulse of 8.3 ms half- sine wave at 25ºC (unidirectional only) • Solder temperatures: 260 ºC for 10 s (maximum) • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 • FINISH: Tin-lead or RoHS Compliant matte-Tin plating solderable per MIL-STD-750, method 2026 • POLARITY: Cathode indicated by band. No marking on bidirectional devices • MARKING: Part number • TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number) • WEIGHT: 1.5 grams (approximate) • See package dimensions on last page CASE 1 |
同様の部品番号 - 1N6282E3 |
|
同様の説明 - 1N6282E3 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |