データシートサーチシステム |
|
SS6714-50CXTB データシート(PDF) 4 Page - Silicon Standard Corp. |
|
SS6714-50CXTB データシート(HTML) 4 Page - Silicon Standard Corp. |
4 / 5 page www.SiliconStandard.com 4 of 5 SS6714 BLOCK DIAGRAM + VOUT VIN GND - + - VREF PIN DESCRIPTIONS VOUT PIN - Output pin. GND PIN - Power GND. VIN PIN - Power Supply Input. APPLICATION INFORMATION A capacitor of at least 1 µF is required between the output of the SS6714 and ground for stability. Without this capacitor the part will oscillate. Even though most types of capacitor may work, the equivalent series resistance (ESR) should be held to 5 Ω or less if an aluminum electrolytic type is used. Many aluminum electrolytic capacitors have electrolytes that freeze at about -30 °C, so solid tantalum capacitors are recommended for operation below -25 °C. The value of this capacitor may be increased without limit. A capacitor of at least 0.1 µF should be placed from the input of the SS6714 to ground if the lead inductance between the input and power source exceeds 500nH (approximately 10 inches of trace). Rev.2.02 4/26/2004 |
同様の部品番号 - SS6714-50CXTB |
|
同様の説明 - SS6714-50CXTB |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |