データシートサーチシステム |
|
SA2531A データシート(PDF) 7 Page - Sames |
|
SA2531A データシート(HTML) 7 Page - Sames |
7 / 24 page sames SA2531 A/B/C/E/G/U 7/24 Post dialled digits, i.e. digits manually entered after LNR has been invoked, are not stored in RAM but buffered in FIFO. Pauses can be inserted by pressing the PAUSE key. (Further details of the Pause Function are included in the Memory Keys section.) Recall Function A Recall (R key or R2 key) activation will invoke a Flash (Timed Loop Break). If Recall is the first entry in a digit string, it will be stored in LNR RAM when digit(s) are entered after the Recall. If the recall key is depressed after a digit string has been entered or dialled out, the recall will not be stored but buffered in the FIFO together with subsequently entered digits. If pressing the recall key is not followed by digit entries, the LNR RAM remains intact. After a recall a pause of 27ums or 3 seconds will automatically be executed. On versions C/C/E/G a recall cannot be executed in LD mode. Memory Keys The keys M1 to M10 are direct memory access keys and the MEM key is used for indirect or abbreviated dialling. In the on chip RAM, 14 numbers can be stored. Each number can contain up to 21 digits (including pauses). During programming multiple pauses can be inserted by pressing the PAUSE key or the LNR key. Each pause is 3 seconds (optionally 6 or 2 seconds) when inserted within the first 5 digits otherwise a wait function that will halt dialling until the PAUSE key or the LNR key is depressed. Memory dialling is cascadable. However, the content of one memory must be dialled out before a new one can be invoked. Mute Function The MUTE key is enabled in speech mode only. Depressing the MUTE key mutes the microphone amplifier. Repressing the MUTE key deactivates the mute (toggle function). Any key entry overwrites a mute activated by the MUTE key and mute will be deactivated. When privacy mute is activated a reminder tone is applied to the earpiece. Sliding Cursor Procedure To accommodate easy and uncomplicated redialling (LNR) behind a PABX, a sliding cursor protocol is implemented. If new entries match the previous RAM contents, pressing the LNR key will dial out the remaining digits. If there is an error in matching, the LNR will be inhibited until next on-hook, and the RAM will contain the new number. |
同様の部品番号 - SA2531A |
|
同様の説明 - SA2531A |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |