データシートサーチシステム |
|
TS3V340DGVRG4 データシート(PDF) 3 Page - Texas Instruments |
|
TS3V340DGVRG4 データシート(HTML) 3 Page - Texas Instruments |
3 / 30 page TS3V340 QUAD SPDT HIGHBANDWIDTH VIDEO SWITCH WITH LOW AND FLAT ONSTATE RESISTANCE SCDS172A - JULY 2004 − REVISED DECEMBER 2004 3 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PARAMETER DEFINITIONS PARAMETER DESCRIPTION RON Resistance between the D and S ports, with the switch in the ON state IOZ Output leakage current measured at the D and S ports, with the switch in the OFF state IOS Short-circuit current measured at the I/O pins VIN Voltage at IN VEN Voltage at EN CIN Capacitance at the control (EN, IN) inputs COFF Capacitance at the analog I/O port when the switch is OFF CON Capacitance at the analog I/O port when the switch is ON VIH Minimum input voltage for logic high for the control (EN, IN) inputs VIL Maximum input voltage for logic low for the control (EN, IN) inputs VIK I/O and control (EN, IN) inputs diode clamp voltage VI Voltage applied to the D or S pins when D or S is the switch input VO Voltage applied to the D or S pins when D or S is the switch output IIH Input high leakage current of the control (EN, IN) inputs IIL Input low leakage current of the control (EN, IN) inputs II Current into the D or S pins when D or S is the switch input IO Current into the D or S pins when D or S is the switch output Ioff Output leakage current measured at the D or S ports, with VCC = 0 tpds Propagation delay measured between S1x and S2x under the specified conditions, measured from 50% of the digital input to 90% of the analog output BW Frequency response of the switch in the ON state, measured at −3 dB XTALK Unwanted signal coupled from channel to channel. Measured in −dB. XTALK = 20 log VO/VI. This is a nonadjacent crosstalk. OIRR OFF isolation is the resistance (measured in −dB) between the input and output with the switch OFF. DG Magnitude variation between analog input and output pins when the switch is ON and the DC offset of composite video signal varies at the analog input pin. In NTSC standard, the frequency of the video signal is 3.58 MHz, and DC offset is from 0 to 0.714 V. DP Phase variation between analog input and output pins when the switch is ON and the DC offset of composite video signal varies at the analog input pin. In NTSC standard, the frequency of the video signal is 3.58 MHz, and DC offset is from 0 to 0.714 V. ICC Static power-supply current ICCD Variation of ICC for a change in frequency in the control (EN, IN) inputs ∆ICC Increase in supply current for each control input that is at the specified voltage level, rather than VCC or GND |
同様の部品番号 - TS3V340DGVRG4 |
|
同様の説明 - TS3V340DGVRG4 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |