データシートサーチシステム |
|
ISL54054 データシート(PDF) 5 Page - Intersil Corporation |
|
ISL54054 データシート(HTML) 5 Page - Intersil Corporation |
5 / 13 page 5 FN6461.2 October 19, 2009 Charge Injection, Q VG = 0V, RG = 0Ω, CL = 1.0nF (See Figure 2) 25 - 42 - pC OFF Isolation (Nx Inputs Connected) RL = 50Ω, CL = 5pF, f = 100kHz, VCOM =1VRMS (See Figure 3) 25 - 74 - dB OFF Isolation (Single Nx Input) RL = 50Ω, CL = 5pF, f = 100kHz, VCOM =1VRMS (See Figure 3) 25 - 83 - dB NO or NC OFF Capacitance, COFF (Nx Inputs Connected) f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 5) 25 - 30 - pF COM ON Capacitance, CCOM(ON) (Nx Inputs Connected) f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 5) 25 - 62 - pF NO or NC OFF Capacitance, COFF (Single Nx Input) f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 5) 25 - 16 - pF COM ON Capacitance, CCOM(ON) (Single Nx Input) f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 5) 25 - 89 - pF DIGITAL INPUT CHARACTERISTICS Input Voltage Low, VINL Full - - 0.5 V Input Voltage High, VINH Full 1.4 -- V Input Current, IINH, IINL V+ = 3.6V, VIN = 0V or V+ Full -1 - 1 μA Electrical Specifications - 1.8V Supply Test Conditions: V+ = +1.8V, GND = 0V, VINH = 1.8V, VINL = 0V (Note 9), Unless Otherwise Specified. Boldface limits apply over the operating tem- perature range, -40°C to +85°C. PARAMETER TEST CONDITIONS TEMP (°C) MIN (Notes 10, 11) TYP MAX (Notes 10, 11) UNITS ANALOG SWITCH CHARACTERISTICS Analog Signal Range, VANALOG Full 0 - V+ V ON-Resistance, rON (Nx Inputs Connected) V+ = 1.8V, ICOM = 100mA, VNO or VNC = 0V to V+, Pins 1 and 3 connected, (See Figure 4, Note 13) 25 - 1.1 - Ω Full - 1.3 - Ω ON-Resistance, rON (Single Nx Input) V+ = 1.8V, ICOM = 100mA, VNO or VNC = 0V to V+ (See Figure 4, Note 13) 25 - 2.3 - Ω Full - 2.53 - Ω DYNAMIC CHARACTERISTICS Turn-ON Time, tON V+ = 1.8V, VNO or VNC = 1.5V, RL = 50Ω, CL = 35pF (See Figure 1) 25 - 115 - ns Full - 246 - ns Turn-OFF Time, tOFF V+ = 1.8V, VNO or VNC = 1.5V, RL = 50Ω, CL = 35pF (See Figure 1) 25 - 90 - ns Full - 192 - ns Charge Injection, Q VG = 0V, RG = 0Ω,CL = 1.0nF (See Figure 2) 25 - 22 - pC NOTES: 9. VIN = input voltage to perform proper function. 10. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. 11. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization and are not production tested. 12. Flatness is defined as the difference between maximum and minimum value of on-resistance over the specified analog signal range. 13. Limits established by characterization and are not production tested. Electrical Specifications - 3V Supply Test Conditions: V+ = +2.7V to +3.6V, GND = 0V, VINH = 1.4V, VINL = 0.5V (Note 9), Unless Otherwise Specified. Boldface limits apply over the operat- ing temperature range, -40°C to +85°C. (Continued) PARAMETER TEST CONDITIONS TEMP (°C) MIN (Notes 10, 11) TYP MAX (Notes 10, 11) UNITS ISL54054, ISL54055 |
同様の部品番号 - ISL54054 |
|
同様の説明 - ISL54054 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |