データシートサーチシステム |
|
33892 データシート(PDF) 10 Page - Freescale Semiconductor, Inc |
|
33892 データシート(HTML) 10 Page - Freescale Semiconductor, Inc |
10 / 28 page 33892 MOTOROLA ANALOG INTEGRATED CIRCUIT DEVICE DATA 10 STATIC ELECTRICAL CHARACTERISTICS (continued) Characteristics noted under conditions 4.5 V ≤ VDD ≤ 5.5V, 6V ≤ VPWR ≤ 27 V, -40°C ≤ TJ ≤ 150°C unless otherwise noted. Typical values noted reflect the approximate parameter mean at TA = 25°C under nominal conditions unless otherwise noted. Characteristic Symbol Min Typ Max Unit CONTROL INTERFACE Input Logic High Voltage (Note 17) VIH 0.7VDD – – V Input Logic Low Voltage (Note 17) VIL – – 0.2VDD V Input Logic Voltage Hysteresis (Note 17) VIN(HYS) 100 350 750 mV Input Logic Pull-Down Current (SCLK, IN, SI, IN[0:3]) IDWN 5.0 – 20 µA RST Input Voltage Range VRST 4.5 5.0 5.5 V SO, FS Tri-State Capacitance (Note 18) CSO – – 20 pF Input Logic Pull-Down Resistor (RST) and WAKE IDWN 100 200 400 k Ω Input Capacitance (Note 19) CIN – 4.0 12 pF Wake Input Clamp Voltage (Note 20) ICL(WAKE) < 2.5 mA VCL(WAKE) 7.0 – 14 V Wake Input Forward Voltage ICL(WAKE) = -2.5 mA VF(WAKE) -2.0 – -0.3 V SO High-State Output Voltage IOH = 1.0 mA VSOH 0.8VDD – – V FS , SO Low-State Output Voltage IOL = -1.6 mA VSOL – 0.2 0.4 V SO Tri-State Leakage Current CS > 0.7 VDD ISO(LEAK) -5.0 0 5.0 µA Input Logic Pull-Up Current (Note 21) CS , VIN > 0.7 VDD IUP 5.0 – 20 µA FSI Input terminal External Pull-Down Resistance (Note 22) FSI Disabled, HS[0:3] Indeterminate FSI Enabled, all HS OFF FSI Enabled, HS0 ON, HS[1:3] OFF FSI Enabled, HS0 and HS2 ON, HS1 and HS3 OFF RFS RFSdis RFSoffoff RFSonoff RFSonon – 6.0 15 30 0 6.5 17 Infinite 1.0 7.0 19 – k Ω Notes 17. Upper and lower logic threshold voltage range applies to SI, CS, SCLK, RST, IN[0:3], and WAKE input signals. The WAKE and RST signals may be supplied by a derived voltage referenced to VPWR. 18. Parameter is guaranteed by process monitoring but is not production tested. 19. Input capacitance of SI, CS, SCLK, RST, and WAKE. This parameter is guaranteed by process monitoring but is not production tested. 20. The current must be limited by a series resistance when using voltages > 7.0 V. 21. Pull-up current is with CS OPEN. CS has an active internal pull-up to VDD. 22. The selection of the RFS must take into consideration the tolerance, temperature coefficient and lifetime duration to assure that the resistance value will always be within the desired (specified) range. Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com |
同様の部品番号 - 33892 |
|
同様の説明 - 33892 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |