TPS75101EP, '75115EP, '75118EP, '75125EP, '75133EP WITH POWER GOOD

TPS75301EP, TPS75315EP, TPS75318EP, TPS75325EP, TPS75333EP WITH RESET

FAST TRANSIENT RESPONSE 1.5A LOW DROPOUT VOLTAGE REGULATORS

SGLS158 − APRIL 2003

1

POST OFFICE BOX 655303

− One Assembly/Test Site, One Fabrication

Site

Sources (DMS) Support

Output and Adjustable Versions

Output (TPS751xxQ)

Delay (TPS753xxQ)

(TPS75133Q)

† Component qualification in accordance with JEDEC and industry

standards to ensure reliable operation over an extended

temperature range. This includes, but is not limited to, Highly

Accelerated Stress Test (HAST) or biased 85/85, temperature

cycle, autoclave or unbiased HAST, electromigration, bond

intermetallic life, and mold compound life. Such qualification

testing should not be viewed as justifying use of this component

beyond specified performance and environmental limits.

For Fixed-Output Versions

description

The TPS753xxQ and TPS751xxQ are low dropout regulators with integrated power-on reset and power-good (PG)

functions respectively. These devices are capable of supplying 1.5 A of output current with a dropout of 160 mV

(TPS75133Q, TPS75333Q). Quiescent current is 75

µA at full load and drops down to 1 µA when the device is

disabled. TPS751xxQ and TPS753xxQ are designed to have fast transient response for larger load current

changes.

Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 160 mV at an

output current of 1.5 A for the TPS75x33Q) and is directly proportional to the output current. Additionally, since the

PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading

(typically 75

µA over the full range of output current, 1 mA to 1.5 A). These two key specifications yield a significant

improvement in operating life for battery-powered systems.

The device is enabled when EN is connected to a low level voltage. This LDO family also features a sleep mode;

applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1

For the TPS751xxQ, the power-good terminal (PG) is an active high, open drain output, which can be used to

implement a power-on reset or a low-battery indicator.

Copyright

 2003, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PowerPAD is a trademark of Texas Instruments.

1

2

3

4

5

6

7

8

9

10

20

19

18

17

16

15

14

13

12

11

PWP PACKAGE

(TOP VIEW)

GND/HEATSINK

NC

IN

IN

EN

FB/SENSE

OUTPUT

OUTPUT

GND/HEATSINK

GND/HEATSINK

NC

NC

GND

NC

NC

NC

NC

NC

GND/HEATSINK

NC − No internal connection

† PG is on the TPS751xx and RESET is on the TPS753xx