データシートサーチシステム |
|
AD660AR データシート(PDF) 2 Page - Analog Devices |
|
AD660AR データシート(HTML) 2 Page - Analog Devices |
2 / 12 page AD660–SPECIFICATIONS (T A = +25 C, VCC = +15 V, VEE = –15 V, VLL = +5 V unless otherwise noted) AD660AN/AR/SQ AD660BN/BR Parameter Min Typ Max Min Typ Max Units RESOLUTION 16 16 Bits DIGITAL INPUTS (TMIN to TMAX) VIH (Logic “1”) 2.0 5.5 * * Volts VIL (Logic “0”) 0 0.8 * * Volts IIH (VIH = 5 5 V) ±10 * µA IIL (VIL = 0 V) ±10 * µA TRANSFER FUNCTION CHARACTERISTICS 1 Integral Nonlinearity ±2 ±1 LSB TMIN to TMAX ±4 ±2 LSB Differential Nonlinearity ±2 ±1 LSB TMIN to TMAX ±4 ±2 LSB Monotonicity Over Temperature 14 15 Bits Gain Error 2, 3 ±0.10 * % of FSR Gain Drift (TMIN to TMAX) 25 15 ppm/ °C DAC Gain Error 4 ±0.05 * % of FSR DAC Gain Drift 4 10 * ppm/ °C Unipolar Offset ±2.5 * mV Unipolar Offset Drift (TMIN to TMAX) 3 * ppm/ °C Bipolar Zero Error ±7.5 * mV Bipolar Zero Error Drift (TMIN to TMAX) 5 * ppm/ °C REFERENCE INPUT Input Resistance 7 10 13 * * * k Ω Bipolar Offset Input Resistance 7 10 13 * * * k Ω REFERENCE OUTPUT Voltage 9.99 10.00 10.01 * * * Volts Drift 25 15 ppm/ °C External Current 5 24 * * mA Capacitive Load 1000 * pF Short Circuit Current 25 * mA OUTPUT CHARACTERISTICS Output Voltage Range Unipolar Configuration 0 +10 * * Volts Bipolar Configuration –10 +10 * * Volts Output Current 5 * mA Capacitive Load 1000 * pF Short Circuit Current 25 * mA POWER SUPPLIES Voltage VCC 6 +13.5 +16.5 * * Volts VEE 6 –13.5 –16.5 * * Volts VLL +4.5 +5.5 * * Volts Current (No Load) ICC +12 +18 * * mA IEE –12 –18 * * mA ILL @ VIH, VIL = 5, 0 V 0.3 2 * * mA @ VIH, VIL = 2.4, 0.4 V 3 7.5 * * mA Power Supply Sensitivity 1 2 * * ppm/% Power Dissipation (Static, No Load) 365 625 * * mW TEMPERATURE RANGE Specified Performance (A, B) –40 +85 * * °C Specified Performance (S) –55 +125 °C NOTES 1For 16-bit resolution, 1 LSB = 0.0015% of FSR. For 15-bit resolution, 1 LSB = 0.003% of FSR. For 14-bit resolution, 1 LSB = 0.006% of FSR. FSR stands for Full-Scale Range and is 10 V in a Unipolar Mode and 20 V in Bipolar Mode. 2Gain error and gain drift are measured using the internal reference. The internal reference is the main contributor to gain drift. If lower gain drift is required, the AD660 can be used with a precision external reference such as the AD587, AD586 or AD688. 3Gain Error is measured with fixed 50 Ω resistors as shown in the Application section. Eliminating these resistors increases the gain error by 0.25% of FSR (Unipolar mode) or 0.50% of FSR (Bipolar mode). 4DAC Gain Error and Drift are measured with an external voltage reference. They represent the error contributed by the DAC alone, for use with an external reference. 5External current is defined as the current available in addition to that supplied to REF IN and SPAN/BIPOLAR OFFSET on the AD660. 6Operation on ±12 V supplies is possible using an external reference such as the AD586 and reducing the output range. Refer to the Internal/External Reference section. *Indicates that the specification is the same as AD660AN/AR/SQ. Specifications subject to change without notice. REV. A –2– |
同様の部品番号 - AD660AR |
|
同様の説明 - AD660AR |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |