ADE7953 datasheet(9/68 Pages) AD

部品番号	ADE7953

部品情報	Single Phase, Multifunction Metering IC with Neutral Current Measurement

Download	68 Pages

Scroll/Zoom	100%

メーカー	AD [Analog Devices]

ホームページ	http://www.analog.com

Logo

9 / 68 page

Data Sheet

ADE7953

Rev. A | Page 9 of 68

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

1

ZX

2

RESET

3

VINTD

4

DGND

5

IAP

6

IAN

7

PULL_HIGH

NOTES

1. CREATE A SIMILAR PAD ON THE PCB UNDER THE EXPOSED PAD.

SOLDER THE EXPOSED PAD TO THE PAD ON THE PCB TO CONFER

MECHANICAL STRENGTH TO THE PACKAGE. DO NOT CONNECT THE

PADS TO AGND.

17 VDD

18 CLKIN

19 CLKOUT

20 REVP

21 ZX_I

16 AGND

15 VINTA

ADE7953

TOP VIEW

(Not to Scale)

Figure 4. Pin Configuration

Table 5. Pin Function Descriptions

Pin No.

Mnemonic

Description

1

ZX

Voltage Channel Zero-Crossing Output Pin. See the Voltage Channel Zero Crossing section. This pin can

be configured to output a range of alternative power quality signals (see the Alternative Output Functions

section).

2

RESET

Active Low Reset Input. To initiate a hardware reset, this pin must be brought low for at minimum of 10 μs.

3

VINTD

This pin provides access to the 2.5 V digital LDO. This pin should be decoupled with a 4.7 μF capacitor in

parallel with a 100 nF ceramic capacitor.

4

DGND

Ground Reference for the Digital Circuitry.

5, 6

IAP, IAN

Analog Input for Current Channel A (Phase Current Channel). This differential voltage input has a maximum

input range of ±500 mV. The maximum pin voltage for single-ended use is ±250 mV. The PGA associated

with this input has a maximum gain stage of 22 (see the Analog Inputs section).

7, 8

PULL_HIGH

These pins should be connected to VDD for proper operation.

9, 10

IBP, IBN

Analog Input for Current Channel B (Neutral Current Channel). This differential voltage input has a maximum

input range of ±500 mV. The PGA associated with this input has a maximum gain of 16 (see the Analog

Inputs section).

11, 12

VN, VP

Analog Input for Voltage Channel. This differential voltage input has a maximum input range of ±500 mV. The

PGA associated with this input has a maximum gain of 16 (see the Analog Inputs section).

13

REF

This pin provides access to the on-chip voltage reference. The internal reference has a nominal voltage

of 1.2 V. This pin should be decoupled with a 4.7 μF capacitor in parallel with a 100 nF ceramic capacitor.

Alternatively, an external reference voltage of 1.2 V can be applied to this pin (see the Reference Circuit

section).

14

PULL_LOW

This pin should be connected to AGND for proper operation.

15

VINTA

This pin provides access to the 2.5 V analog LDO. This pin should be decoupled with a 4.7 μF capacitor in

parallel with a 100 nF ceramic capacitor.

16

AGND

Ground Reference for the Analog Circuitry.

17

VDD

Power Supply (3.3 V) for the ADE7953. For specified operation, the input to this pin should be within

3.3 V ± 10%. This pin should be decoupled with a 10 μF capacitor in parallel with a 100 nF ceramic capacitor.

18

CLKIN

Master Clock Input for the ADE7953. An external clock can be provided at this input. Alternatively, a parallel

resonant AT crystal can be connected across the CLKIN and CLKOUT pins to provide a clock source for the

ADE7953. The clock frequency for specified operation is 3.58 MHz. Ceramic load capacitors of a few tens of

picofarads should be used with the gate oscillator circuit. Refer to the crystal manufacturer’s data sheet for

the load capacitance requirements.

19

CLKOUT

A crystal can be connected across this pin and CLKIN to provide a clock source for the ADE7953.

同様の部品番号 - ADE7953

メーカー	部品番号	データシート	部品情報
Analog Devices	ADE7903	994Kb / 20P	3-Channel, Sigma-Delta ADC with SPI
	ADE7903ARWZ	994Kb / 20P	3-Channel, Sigma-Delta ADC with SPI
	ADE7903ARWZ-RL	994Kb / 20P	3-Channel, Sigma-Delta ADC with SPI
	ADE7912	949Kb / 44P	3-Channel, Isolated, Sigma-Delta ADC with SPI REV. 0
	ADE7912	885Kb / 41P	3-Channel, Isolated, Sigma-Delta ADC with SPI Rev. C

More results

同様の説明 - ADE7953

メーカー	部品番号	データシート	部品情報
Sames	SA9903B	530Kb / 17P	Single Phase Multifunction Energy Metering IC
Analog Devices	ADE7753	725Kb / 60P	Single-Phase Multifunction Metering IC with di/dt Sensor Interface REV. C
Analog Devices	ADE7753	725Kb / 60P	Single-Phase Multifunction Metering IC with di/dt Sensor Interface REV. C
Sames	SA9904B	552Kb / 18P	Three Phase Multifunction Energy Metering IC
Analog Devices	ADE7758	1Mb / 68P	Poly Phase Multifunction Energy Metering IC with Per Phase Information REV. A
	ADE7758	979Kb / 72P	Poly Phase Multifunction Energy Metering IC with Per Phase Information Rev. E
	ADE7880	1Mb / 104P	Polyphase Multifunction Energy Metering IC REV. A
	ADE7858	1Mb / 76P	Poly Phase Multifunction Energy Metering IC with per Phase Active and Reactive Powers Rev. PrA
	ADE7754	530Kb / 44P	Polyphase Multifunction Energy Metering IC with Serial Port REV. 0
	ADE7878	1Mb / 92P	Polyphase Multifunction Energy Metering IC with per Phase Active and Reactive Powers REV. 0