Absolute maximum ratings and operating conditions

TS914, TS914A

2/17

Doc ID 4475 Rev 8

1

Absolute maximum ratings and operating conditions

Table 1.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

1.

All voltage values, except differential voltage are with respect to network ground terminal.

18

V

2.

Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.

±18

V

3.

-0.3 to 18

V

Current on inputs

±50

mA

Current on outputs

±130

mA

Maximum junction temperature

150

°C

Storage temperature

-65 to +150

°C

4.

Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-

circuit on all amplifiers. These are typical values.

103

°C/W

Thermal resistance junction to case

31

°C/W

ESD

HBM: human body model

(5)

5.

Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a

1.5 k

Ω resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

1kV

6.

Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5

Ω). This is done for all couples of

connected pin combinations while the other pins are floating.

50

V

7.

Charged device model: all pins and the package are charged together to the specified voltage and then

discharged directly to ground through only one pin. This is done for all pins.

1.5

kV

Table 2.

Operating conditions

Symbol

Parameter

Value

Unit

Supply voltage

2.7 to 16

V

Common mode input voltage range

V

Operating free air temperature range

-40 to + 125

°C