R1 = R2

1.237V

-1

SW

FB

GND

SHDN

LM2703

SNVS172F – FEBRUARY 2002 – REVISED MAY 2013

www.ti.com

Connection Diagram

Top View

to-ambient thermal resistance,

temperature.

Figure 2. SOT23-5

PIN DESCRIPTIONS

Pin

Name

Function

1

SW

Power Switch input.

2

GND

Ground.

3

FB

Output voltage feedback input.

4

SHDN

Shutdown control input, active low.

5

Analog and Power input.

SW (Pin 1): Switch Pin.

This is the drain of the internal NMOS power switch. Minimize the metal trace area

connected to this pin to minimize EMI.

GND (Pin 2): Ground Pin.

Tie directly to ground plane.

FB (Pin 3): Feedback Pin.

Set the output voltage by selecting values for R1 and R2 using:

(1)

Connect the ground of the feedback network to an AGND plane which should be tied directly

to the GND pin.

SHDN (Pin 4): Shutdown Pin.

The shutdown pin is an active low control. Tie this pin above 1.1V to enable the device. Tie

this pin below 0.3V to turn off the device.

Bypass this pin with a capacitor as close to the device as possible.

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

2

Submit Documentation Feedback

Copyright © 2002–2013, Texas Instruments Incorporated

Product Folder Links: LM2703