データシートサーチシステム |
|
LM124JPB データシート(PDF) 3 Page - National Semiconductor (TI) |
|
|
LM124JPB データシート(HTML) 3 Page - National Semiconductor (TI) |
3 / 31 page LM124-N, LM224-N, LM2902-N, LM324-N www.ti.com SNOSC16B – MAY 2004 – REVISED SEPTEMBER 2004 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ABSOLUTE MAXIMUM RATINGS (1) (2) LM124-N/LM224- LM2902-N N/LM324-N LM124A/LM224A/LM324 A Supply Voltage, V+ 32V 26V Differential Input Voltage 32V 26V Input Voltage −0.3V to +32V −0.3V to +26V Input Current (VIN < −0.3V) (3) 50 mA 50 mA Power Dissipation(4) PDIP 1130 mW 1130 mW CDIP 1260 mW 1260 mW SOIC Package 800 mW 800 mW Output Short-Circuit to GND (One Amplifier)(5) V+ ≤ 15V and TA = 25°C Continuous Continuous Operating Temperature Range −40°C to +85°C LM324-N/LM324A 0°C to +70°C LM224-N/LM224A −25°C to +85°C LM124-N/LM124A −55°C to +125°C Storage Temperature Range −65°C to +150°C −65°C to +150°C Lead Temperature (Soldering, 10 seconds) 260°C 260°C Soldering Information Dual-In-Line Package Soldering (10 seconds) 260°C 260°C Small Outline Package Vapor Phase (60 seconds) 215°C 215°C Infrared (15 seconds) 220°C 220°C ESD Tolerance(6) 250V 250V (1) Refer to RETS124AX for LM124A military specifications and refer to RETS124X for LM124-N military specifications. (2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ (3) This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the input PNP transistors becoming forward biased and thereby acting as input diode clamps. In addition to this diode action, there is also lateral NPN parasitic transistor action on the IC chip. This transistor action can cause the output voltages of the op amps to go to the V+voltage level (or to ground for a large overdrive) for the time duration that an input is driven negative. This is not destructive and normal output states will re-establish when the input voltage, which was negative, again returns to a value greater than −0.3V (at 25°C). (4) For operating at high temperatures, the LM324-N/LM324A/LM2902-N must be derated based on a +125°C maximum junction temperature and a thermal resistance of 88°C/W which applies for the device soldered in a printed circuit board, operating in a still air ambient. The LM224-N/LM224A and LM124-N/LM124A can be derated based on a +150°C maximum junction temperature. The dissipation is the total of all four amplifiers—use external resistors, where possible, to allow the amplifier to saturate of to reduce the power which is dissipated in the integrated circuit. (5) Short circuits from the output to V+ can cause excessive heating and eventual destruction. When considering short circuits to ground, the maximum output current is approximately 40 mA independent of the magnitude of V+. At values of supply voltage in excess of +15V, continuous short-circuits can exceed the power dissipation ratings and cause eventual destruction. Destructive dissipation can result from simultaneous shorts on all amplifiers. (6) Human body model, 1.5 k Ω in series with 100 pF. Copyright © 2004, Texas Instruments Incorporated Submit Documentation Feedback 3 Product Folder Links: LM124-N LM224-N LM2902-N LM324-N |
同様の部品番号 - LM124JPB |
|
同様の説明 - LM124JPB |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |