データシートサーチシステム |
|
ISL23318UFUZ データシート(PDF) 8 Page - Intersil Corporation |
|
ISL23318UFUZ データシート(HTML) 8 Page - Intersil Corporation |
8 / 19 page ISL23318 8 FN7887.0 July 26, 2011 DCP Macro Model tF SDA and SCL Fall Time From 70% to 30% of VLOGIC 20 + 0.1 x Cb 250 ns Cb Capacitive Loading of SDA or SCL Total on-chip and off-chip 10 400 pF tSU:A A1, A0 Set-up Time Before START condition 600 ns tHD:A A1, A0 Hold Time After STOP condition 600 ns NOTES: 8. Typical values are for TA = +25°C and 3.3V supply voltages. 9. LSB = [V(RW)127 – V(RW)0]/127. V(RW)127 and V(RW)0 are V(RW) for the DCP register set to 7F hex and 00 hex respectively. LSB is the incremental voltage when changing from one tap to an adjacent tap. 10. ZS error = V(RW)0/LSB. 11. FS error = [V(RW)127 – VCC]/LSB. 12. DNL = [V(RW)i – V(RW)i-1]/LSB-1, for i = 1 to 127. i is the DCP register setting. 13. INL = [V(RW)i – i • LSB – V(RW)0]/LSB for i = 1 to 127. 14. For i = 16 to 127 decimal, T = -40°C to +125°C. Max( ) is the maximum value of the wiper voltage and Min( ) is the minimum value of the wiper voltage over the temperature range. 15. MI = |RW127 – RW0|/127. MI is a minimum increment. RW127 and RW0 are the measured resistances for the DCP register set to 7F hex and 00 hex respectively. 16. Roffset = RW0/MI, when measuring between RW and RL. Roffset = RW127/MI, when measuring between RW and RH. 17. RDNL = (RWi – RWi-1)/MI -1, for i = 8 to 127. 18. RINL = [RWi – (MI • i) – RW0]/MI, for i = 8 to 127. 19. For i = 8 to 127, T = -40°C to +125°C. Max( ) is the maximum value of the resistance and Min( ) is the minimum value of the resistance over the temperature range. 20. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design. 21. It is preferable to ramp up both the VLOGIC and the VCC supplies at the same time. If this is not possible, it is recommended to ramp-up the VLOGIC first followed by the VCC. Serial Interface Specification For SCL, SDA, A0, A1 unless otherwise noted. (Continued) SYMBOL PARAMETER TEST CONDITIONS MIN (Note 20) TYP (Note 8) MAX (Note 20) UNITS TCV Max V RW ()i () Min V RW ()i () – VRWi +25°C () () ------------------------------------------------------------------------------ 106 +165°C --------------------- × = TCR Max Ri () Min Ri () – [] Ri +25°C () ------------------------------------------------------- 10 6 +165°C --------------------- × = 32pF RH RTOTAL CH 32pF CW CL 32pF RW RL |
同様の部品番号 - ISL23318UFUZ |
|
同様の説明 - ISL23318UFUZ |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |