データシートサーチシステム |
|
TCAN1042HDR データシート(PDF) 6 Page - Texas Instruments |
|
|
TCAN1042HDR データシート(HTML) 6 Page - Texas Instruments |
6 / 32 page 6 TCAN1042H, TCAN1042HG TCAN1042HGV, TCAN1042HV SLLSES7 – FEBRUARY 2016 www.ti.com Product Folder Links: TCAN1042H TCAN1042HG TCAN1042HGV TCAN1042HV Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated (1) All typical values are at 25°C and supply voltages of VCC = 5 V and VIO = 5 V, RL = 60 Ω. 7.5 Electrical Characteristics Over recommended operating conditions with TA = –55°C to 125°C (unless otherwise noted). PARAMETER TEST CONDITIONS MIN TYP(1) MAX UNIT SUPPLY CHARACTERISTICS ICC 5-V Supply current Normal Mode (Driving Dominant) See Figure 5, TXD = 0 V, RL = 60 Ω, CL = open, RCM = open, STB = 0 V, Typical Bus Load 40 70 mA See Figure 5, TXD = 0 V, RL = 50 Ω, CL = open, RCM = open, STB = 0 V, High Bus Load 45 80 Normal Mode (Driving Dominant – with bus fault) See Figure 5, TXD = 0 V, STB = 0V, CANH = -12V, RL = open, CL = open, RCM = open 180 Normal Mode (Recessive) See Figure 5, TXD = VCC or VIO, RL = 50 Ω, CL = open, RCM = open, STB = 0V 1.5 2.5 Standby Mode Devices with the "V" suffix (I/O Level Shifting Devices), VCC not needed in Standby Mode, See Figure 5, TXD = VIO, RL = 50 Ω, CL = open, RCM = open, STB = VIO 0.5 5 µA Devices without the "V" suffix (5V only), See Figure 5, TXD = VCC, RL = 50 Ω, CL = open, RCM = open, STB = VCC 22 IIO I/O Supply Current Normal Mode RXD floating, TXD = STB = 0 or 5.5 V 90 300 Standby Mode RXD floating, TXD = STB = VIO, VCC = 0 or 5.5 V 12 17 UVVCC Rising Undervoltage detection on VCC for protected mode 4.2 4.4 V Falling Undervoltage detection on VCC for protected mode 3.8 4.0 4.25 VHYS(UVVCC) Hysteresis voltage on UVVCC 200 mV UV(VIO) Undervoltage detection on VIO for protected mode Devices with the "V" suffix (I/O Level Shifting Devices) 1.3 2.75 V VHYS(UVIO) Hysteresis voltage on UVIO 80 mV STB TERMINAL (MODE SELECT INPUT) VIH HIGH-level input voltage Devices with the "V" suffix (I/O Level Shifting Devices) 0.7 x VIO V Devices without the "V" suffix (5V only) 2 VIL LOW-level input voltage Devices with the "V" suffix (I/O Level Shifting Devices) 0.3 x VIO Devices without the "V" suffix (5V only) 0.8 IIH HIGH-level input leakage current STB = VCC = VIO = 5.5 V -2 2 µA IIL Low-level input leakage current STB = 0V, VCC = VIO = 5.5 V –20 0 -2 Ilkg(OFF) Unpowered leakage current STB = 5.5 V, VCC = VIO = 0 V -1 0 1 TXD TERMINAL (CAN TRANSMIT DATA INPUT) VIH HIGH level input voltage Devices with the "V" suffix (I/O Level Shifting Devices) 0.7 x VIO V Devices without the "V" suffix (5V only) 2 VIL LOW level input voltage Devices with the "V" suffix (I/O Level Shifting Devices) 0.3 x VIO V Devices without the "V" suffix (5V only) 0.8 IIH HIGH level input leakage current TXD = VCC = VIO = 5.5 V –2.5 0 1 µA IIL Low level input leakage current TXD = 0V, VCC = VIO = 5.5 V –100 -25 –7 µA Ilkg(OFF) Unpowered leakage current TXD = 5.5 V, VCC = VIO = 0 V –1 0 1 µA |
同様の部品番号 - TCAN1042HDR |
|
同様の説明 - TCAN1042HDR |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |