SN54LV374A, SN74LV374A

www.ti.com

SCLS408I – APRIL 1998 – REVISED MARCH 2015

9 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component

specification, and TI does not warrant its accuracy or completeness. TI’s customers are

responsible for determining suitability of components for their purposes. Customers should

validate and test their design implementation to confirm system functionality.

9.1 Application Information

The SN74LV374A is a low drive CMOS device that can be used for a multitude of bus interface type applications

where output ringing is a concern. The low drive and slow edge rates will minimize overshoot and undershoot on

9.2 Typical Application

Figure 5 shows how the slower edges can reduce ringing on the output compared to higher drive parts like AC.

Figure 5. Typical Application Schematic

9.2.1 Design Requirements

This device uses CMOS technology and has balanced output drive. Take care to avoid bus contention because it

can drive currents that would exceed maximum limits. The high drive will also create fast edges into light loads

so consider routing and load conditions to prevent ringing.

Copyright © 1998–2015, Texas Instruments Incorporated

Submit Documentation Feedback

11

SN74LV374A