データシートサーチシステム |
|
LM4040CIM3-3.0 データシート(PDF) 7 Page - Texas Instruments |
|
|
LM4040CIM3-3.0 データシート(HTML) 7 Page - Texas Instruments |
7 / 67 page 7 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K – OCTOBER 2000 – REVISED JUNE 2016 Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback Copyright © 2000–2016, Texas Instruments Incorporated (1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. (2) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance ±[( ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where max ΔT = 65°C is shown below: A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below: C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5 V × 0.75% = ±19 mV. (3) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. (4) Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature -40°C and the 25°C measurement after cycling to temperature 125°C. 6.5 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and ±0.2%, respectively. PARAMETER TEST CONDITIONS MIN(1) TYP MAX(1) UNIT VR Reverse Breakdown Voltage IR = 100 μA 2.048 V Reverse Breakdown Voltage Tolerance(2) IR = 100 μA LM4040AIM3 LM4040AIZ ±2 mV LM4040BIM3 LM4040BIZ LM4040BIM7 ±4.1 LM4040AIM3 LM4040AIZ TA = TJ = TMIN to TMAX ±15 mV LM4040BIM3 LM4040BIZ LM4040BIM7 TA = TJ = TMIN to TMAX ±17 IRMIN Minimum Operating Current TA = TJ = 25°C 45 60 μA TA = TJ = TMIN to TMAX 65 ΔVR/ΔT Average Reverse Breakdown Voltage Temperature Coefficient(2) IR = 10 mA ±20 ppm/°C IR = 1 mA TA = TJ = 25°C ±15 ppm/°C TA = TJ = TMIN to TMAX ±100 IR = 100 μA ±15 ppm/°C ΔVR/ΔI R Reverse Breakdown Voltage Change with Operating Current Change(3) IRMIN ≤ IR ≤ 1 mA TA = TJ = 25°C 0.3 0.8 mV TA = TJ = TMIN to TMAX 1 1 mA ≤ IR ≤ 15 mA TA = TJ = 25°C 2.5 6 mV TA = TJ = TMIN to TMAX 8 ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.3 0.8 Ω eN Wideband Noise IR = 100 μA 10 Hz ≤ f ≤ 10 kHz 35 μVrms ΔVR Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25°C ±0.1°C IR = 100 μA 120 ppm VHYST Thermal Hysteresis(4) ΔT = –40°C to 125°C 0.08% |
同様の部品番号 - LM4040CIM3-3.0 |
|
同様の説明 - LM4040CIM3-3.0 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |