データシートサーチシステム |
|
TPS75918KC データシート(PDF) 5 Page - Texas Instruments |
|
|
TPS75918KC データシート(HTML) 5 Page - Texas Instruments |
5 / 30 page www.ti.com Input Voltage (IN) Output Voltage (OUTPUT) ABSOLUTE MAXIMUM RATINGS DISSIPATION RATING TABLE RECOMMENDED OPERATING CONDITIONS TPS75901, TPS75915 TPS75918, TPS75925, TPS75933 SLVS318E – DECEMBER 2000 – REVISED MARCH 2004 The VIN terminal is an input to the regulator. The VOUTPUT terminal is an output to the regulator. over operating junction temperature range (unless otherwise noted)(1) TPS759XX Input voltage range(2) VI -0.3 V to 6 V Voltage range at EN -0.3 V to 6 V Maximum PG voltage (TPS759xx) 6 V Peak output current Internally limited Continuous total power dissipation See Dissipation Rating Table Output voltage VO (OUTPUT, FB) 5.5 V Operating junction temperature range TJ -40 °C to 150°C Storage temperature range Tstg -65 °C to 150°C ESD rating HBM 2 kV CDM 500 V (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltage values are with respect to network terminal ground. PACKAGE RΘJC (°C/W) RΘJA (°C/W) (1) TO-220 2 58.7(2) TO-263 2 38.7(3) (1) For both packages, the RΘJAvalues were computed using JEDEC high K board (2S2P) with 1 ounce internal copper plane and ground plane. There was no air flow across the packages. (2) RΘJA was computed assuming a vertical, free standing TO-220 package with pins soldered to the board. There is no heatsink attached to the package. (3) RΘJA was computed assuming a horizontally mounted TO-263 package with pins soldered to the board. There is no copper pad underneath the package. MIN MAX UNIT VI(1) Input voltage 2.8 5.5 V VO Output voltage range 1.22 5 V IO Output current 0 7.5 A TJ Operating virtual junction temperature -40 125 °C (1) To calculate the minimum input voltage for your maximum output current, use the following equation: VI(min)= VO(max)+ VDO(max load). 5 |
同様の部品番号 - TPS75918KC |
|
同様の説明 - TPS75918KC |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |