データシートサーチシステム |
|
LM1279N データシート(PDF) 6 Page - National Semiconductor (TI) |
|
|
LM1279N データシート(HTML) 6 Page - National Semiconductor (TI) |
6 / 14 page Pin Descriptions Pin No. Pin Name Schematic Description 1 Red OSD Input These are standard TTL inputs. An OSD signal at any of the three pins will automatically switch the pre-amp into the OSD mode. 7 colors, including white, are available. 19 Blue OSD Input 20 Green OSD Input 2V CC1 Power supply pin (excluding output stage) 3 Red Video In Video inputs. These inputs must be AC Coupled with a minimum ofa1µF cap, 10 µF is preferred. A series resistor of about 33 Ω must be used for ESD protection. 5 Green Video In 8 Blue Video In 4 Red Clamp Cap The external clamp cap is charged and discharged to the correction voltage needed for DC restoration. 0.1 µF is the recommended value. 7 Green Clamp Cap 9 Blue Clamp Cap 6 Ground Ground pin. 10 Contrast Contrast control pin: 4V - no attenuation 0V - over 40 dB attenuation Drive control pins: 4V - no attenuation 0V - 20 dB attenuation 12 Blue Drive 14 Green Drive 17 Red Drive 11 Sandcastle Input The sandcastle input allows for blanking only, or blanking with DC restoration. Blanking requires a 2V input. Clamping with blanking requires a 4V input. 13 Blue Video Out Video output. For proper black level the output must drive 390 Ω impedance. 15 Green Video Out 18 Red Video Out www.national.com 6 |
同様の部品番号 - LM1279N |
|
同様の説明 - LM1279N |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |