データシートサーチシステム |
|
9-1462036-1 データシート(PDF) 2 Page - TE Connectivity Ltd |
|
9-1462036-1 データシート(HTML) 2 Page - TE Connectivity Ltd |
2 / 5 page 01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. 2 AXICOM Signal Relays FT2/FU2 Relay (Continued) Insulation standard high dielectric* Initial dielectric strength between open contacts 1000Vrms 1500Vrms between contact and coil 1500Vrms 4000Vrms between adjacent contacts 1500Vrms 1800Vrms Initial surge withstand voltage between open contacts 1500V 2500V between contact and coil 2500V 5000V between adjacent contacts 1500V 2500V Initial insulation resistance between insulated elements >109Ω >109Ω Capacitance between open contacts max. 4pF between contact and coil max. 1pF between adjacent contacts max. 1pF Cross talk at 100MHz/900MHz -30.6dB/-13.7dB Insertion loss at 100MHz/900MHz -0.02dB/-0.50dB Voltage standing wave ratio (VSWR) at 100MHz/900MHz 1.02 / 1.27 Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -55°C to +85°C Thermal resistance <125K/W Category of environmental protection IEC 61810 RT III - wash tight Vibration resistance (functional) 10g, 10 to 500Hz Shock resistance (functional), half sinus 11ms 15g Shock resistance (destructive), half sinus 0.5ms 500g Weight max. 3g Resistance to soldering heat THT IEC 60068-2-20 265°C/5s For all High Dielectric Versions (HDV) 260°C/5s Moisture sensitive level, JEDEC J-Std-020D MSL3 related only to SMT and THT-HDV relays packed in orginal dry-packs Ultrasonic cleaning not recommended Packaging/unit THT version tube/50 pcs., box/2000 pcs. SMT short terminals reel/500 pcs.,box/2500 pcs. SMT long terminals reel/400 pcs.,box/2000 pcs. Coil Data (continued) Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDCmin. VDCmax. VDCmin. Ω±10% mW High dielectric Australia version, monostable 71 3 2.25 5.50 0.30 30 300 73 5 3.75 9.20 0.50 83 300 76 12 9.00 22.10 1.20 480 300 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Umax upper limit of the operative range of the coil voltage (limiting voltage) when coils are continuously energized Uop min lower limit of the operative range of the coil voltage (reliable operate voltage) Urel min lower limit of the operative range of the coil voltage (reliable release voltage) 108-98004 Rev. F All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 13 Telecom-, Signal and RF Relays FT2/FU2 Relay Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 -60 -50 -40 -30 -20 -10 010203040506070809010 0 11 0 12 0 13 0 14 0 Unom. nominal coil voltage Uop. min. Urel. min. Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Ambient Temperature [°C] 200 mW coil 240 mW coil 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 130 140 Unom. nominal coil voltage Uop. min. Urel. min. Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Ambient Temperature [°C] 300 mW coil PCB layout TOP view on component side of PCB Terminal assignment TOP view on component side of PCB THT version SMT, long terminals SMT, short terminals *this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength enhancement, SF6 is hermetically sealed in relay without leaks to air during normal applica- tion as recommended per the applicable product specification. It is clarified that the usage of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer for further information and detailed material declaration. |
同様の部品番号 - 9-1462036-1 |
|
同様の説明 - 9-1462036-1 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |