データシートサーチシステム
  Japanese  ▼
ALLDATASHEET.JP

X  

0-853400-3 データシート(PDF) 2 Page - TE Connectivity Ltd

部品番号 0-853400-3
部品情報  Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
Download  6 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
メーカー  TEC [TE Connectivity Ltd]
ホームページ  http://www.te.com/usa-en/home.html
Logo TEC - TE Connectivity Ltd

0-853400-3 データシート(HTML) 2 Page - TE Connectivity Ltd

  0-853400-3 Datasheet HTML 1Page - TE Connectivity Ltd 0-853400-3 Datasheet HTML 2Page - TE Connectivity Ltd 0-853400-3 Datasheet HTML 3Page - TE Connectivity Ltd 0-853400-3 Datasheet HTML 4Page - TE Connectivity Ltd 0-853400-3 Datasheet HTML 5Page - TE Connectivity Ltd 0-853400-3 Datasheet HTML 6Page - TE Connectivity Ltd  
Zoom Inzoom in Zoom Outzoom out
 2 / 6 page
background image
408-9767
2 of 6
Rev R
3. CABLE PREPARATION
Refer to Figure 3, and select the appropriate cable and
die set for the modular plug being used.
The BLACK color-coded tool and die set can be used for non-keyed
modular plugs; however, the RED color-coded tool and die set are more
durable when crimping non-keyed modular plugs.
Standard modular plugs are designed to be used with cable having an
outside diameter of 0.89 to 0.99 mm [.035 to .039 in.]. Use blue (small
conductor) modular plugs with cable having an outside diameter of 0.74 to
0.86 mm [.029 to .034 in.].
Figure 3
Proceed as follows:
3.1. Unshielded Flat Oval Cable (Figure 4)
1. Insert cable squarely into CUT slot in tool cable
cutter. Squeeze handles until ratchet releases.
2. Insert trimmed cable into STRIP slot in tool flat
oval cable stripper until cable butts against die cable
stop.
3. Close handles to last ratchet stop, but DO NOT
release them. Pull cable straight out of tool. Then
release tool handles.
DO NOT squeeze handles together while pulling
cable out. Rather, with handles closed (but not
released) grip head of tool in one hand and cable in
the other; then pull cable straight out of tool.
4. Check cable strip length as shown in Figure 4.
3.2. Shielded Flat Oval Cable and Round Cable
Prepare the cable according to Application
Specification 114-6016.
3.3. High Performance Cable
Prepare the cable according to Application
Specification 114-6053.
DO NOT cut or remove insulation from individual
conductors. This may result in shorted or open
terminations within the terminated assembly.
4. TERMINATION PROCEDURE
Before proceeding, make sure that the cable and
modular plug are compatible, and that cable polarity is
correctly maintained for the specific application.
Before proceeding with high performance modular
plugs, refer to 114-6053 for preparation techniques to
ensure high performance levels.
Refer to Figure 5, and proceed as follows:
1. Hold modular plug as shown (locking latch facing
UP). Insert cable into modular plug until fully
bottomed.
2. Open tool handles. Insert modular plug assembly
fully into die cavity. When using a die set color
coded with green, orange, or blue, make sure that
the modular plug locking latch snaps into position.
When using a die set color coded with black, violet,
or white, make sure that the modular plug bottoms
in the die cavity but the locking latch does not snap
into position.
Failure to fully seat the modular plug assembly in
the die cavity will cause the indenter to mis-align
with the internal strain reliefs of the modular plug,
which may result in damage to the die set.
3. Hold the modular plug in the fully seated position,
and squeeze tool handles until ratchet releases.
MODULAR PLUG
CABLE
DIE SET
COLOR
CODE DOT
POSITION
TYPE
TYPE
STYLE
2
Line
Stranded
Flat Oval
Blue
4
Handset
Solid
Flat Oval
Green
Stranded
Line
Stranded
Flat Oval
Blue
Blue
Solid
6
Line
Solid
Round
Blue
Stranded
Flat Oval
Blue
Solid
Flat Oval
Blue
Offset Latch
Solid
Flat Oval
Orange
Long Body
Unshielded
Solid
Flat Oval
Violet
Stranded
Round
Long Body
Shielded
Stranded
Flat Oval
Violet
8
Unshielded
Stranded
Round
Black
Solid
Flat Oval
Stranded
Solid
Round
Blue
Solid
Flat Oval
Keyed,
Non-Keyed
Stranded
Flat Oval
Shielded
Stranded
Round
Non-Keyed
Stranded
Flat Oval
Red
8
(High
Performance)
Unshielded
Stranded
Round
White
Solid
Shielded
Stranded
Solid
8
(Slimline)
Unshielded
Stranded
Round
Red
Solid
Shielded
Stranded
Solid
NOTE
i
NOTE
i
!
CAUTION


同様の部品番号 - 0-853400-3

メーカー部品番号データシート部品情報
logo
Tyco Electronics
0-85114-1 MACOM-0-85114-1 Datasheet
84Kb / 1P
   .070/.250 HTBRID 15P CAP HSG
0-85114-2 MACOM-0-85114-2 Datasheet
84Kb / 1P
   .070/.250 HTBRID 15P CAP HSG
0-85114-5 MACOM-0-85114-5 Datasheet
84Kb / 1P
   .070/.250 HTBRID 15P CAP HSG
More results

同様の説明 - 0-853400-3

メーカー部品番号データシート部品情報
logo
Tyco Electronics
408-8698 MACOM-408-8698 Datasheet
623Kb / 3P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
408-8695 MACOM-408-8695 Datasheet
988Kb / 3P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
logo
TE Connectivity Ltd
408-32084 TEC-408-32084 Datasheet
650Kb / 5P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
408-6790 TEC-408-6790 Datasheet
306Kb / 3P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
408-1535 TEC-408-1535 Datasheet
640Kb / 7P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
408-1412 TEC-408-1412 Datasheet
741Kb / 7P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
408-9786 TEC-408-9786 Datasheet
427Kb / 6P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
logo
Tyco Electronics
408-1662 MACOM-408-1662 Datasheet
1Mb / 8P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
logo
TE Connectivity Ltd
408-4087 TEC-408-4087 Datasheet
285Kb / 5P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
408-8691 TEC-408-8691 Datasheet
769Kb / 7P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
408-8739 TEC-408-8739 Datasheet
836Kb / 6P
   Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
More results


Html Pages

1 2 3 4 5 6


データシート ダウンロード

Go To PDF Page


リンク URL




プライバシーポリシー
ALLDATASHEET.JP
ALLDATASHEETはお客様のビジネスに役立ちますか?  [ DONATE ] 

Alldatasheetは   |   広告   |   お問い合わせ   |   プライバシーポリシー   |   リンク交換   |   メーカーリスト
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com