データシートサーチシステム |
|
TS4100 データシート(PDF) 8 Page - Silicon Laboratories |
|
TS4100 データシート(HTML) 8 Page - Silicon Laboratories |
8 / 24 page 2.1.8 Power-Up Sequence To prevent permanent damage to the ADDA, ADDB, ADDC, and INH pin, the power supply voltage should be applied to the device first followed by the voltage to ADDA, ADDB, ADDC, and/or INH. If it is not possible to follow this power-supply sequence, a 500kΩ resistor can be placed in series with the digital I/O pins for protection as shown in the figure below. However, if an input voltage is applied be- fore applying power to the switch/multiplexer, the device will not be damaged as the inputs are independent of the supply voltage. Figure 2.5. Digital I/O Overvoltage Protection Figure 2.6. TS4100-TS4102 Address/Enable Turn-On/Off Time Test Setup TS4100/01/02 Data Sheet System Overview silabs.com | Smart. Connected. Energy-friendly. Rev. 1.0 | 7 |
同様の部品番号 - TS4100 |
|
同様の説明 - TS4100 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |