データシートサーチシステム |
|
AD5686 データシート(PDF) 4 Page - Analog Devices |
|
AD5686 データシート(HTML) 4 Page - Analog Devices |
4 / 12 page UG-459 Evaluation Board User Guide Rev. 0 | Page 4 of 12 EVALUATION BOARD SOFTWARE INSTALLING THE SOFTWARE The evaluation kit for the AD568x(R) includes self-installing software on the CD. The software is compatible with Windows® XP, Windows Vista (32-bit) and Windows 7 (32-bit). If users need drivers for 64-bit operating systems, contact Linear.Apps@analog.com. The software must be installed before connecting the SDP board to the USB port of the PC to ensure that the SDP board is recognized when it connects to the PC. To install the software, take the following steps: 1. Start the Windows operating system and insert the CD. 2. The installation software should open automatically. If it does not open automatically, run the setup.exe file from the CD. 3. After installation is completed, power up the evaluation board as described in the Power Supplies section. 4. Connect the evaluation board to the SDP board and the SDP board into the PC using the USB cable included in the box. 5. When the software detects the evaluation board, proceed through any dialog boxes that appear to finalize the installation. RUNNING THE SOFTWARE To run the program, do the following: 1. Connect the evaluation board to the SDP board and connected the USB cable between the SDP board and the PC. 2. Power the SDP and evaluation board by connecting 6 V to the J3 connector. 3. Click Start > All Programs > Analog Devices > AD56x(R). Each of the AD5686R, AD5686, AD5684R, and AD5684 has its own version of software. Click the appropriate one to run the software. As the software connects to the evaluation board, the message in Figure 2 displays. Figure 2. Connection Message If the SDP board is not connected to the USB port when the software is launched, a connectivity error displays (see Figure 3 ). Simply connect the evaluation board to the USB port of the PC, wait a few seconds, click Rescan, and follow the instructions. Figure 3. Connectivity Error Alternatively, the software can be used without an evaluation board. The software runs in simulation mode displaying expected outputs based on the input data. The main window of the AD568x(R) evaluation software then opens, as shown in Figure 4. |
同様の部品番号 - AD5686 |
|
同様の説明 - AD5686 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |