データシートサーチシステム
Selected language   Japanese  ▼
品番検索
         詳細検索


NCP1212 データシート(Datasheet) 4 Page - ON Semiconductor

部品番号. NCP1212
部品情報  Current Mode PWM Controller for Both Forward and Flyback Converters
ダウンロード  22 Pages
Scroll/Zoom Zoom In 100% Zoom Out
メーカー  ONSEMI [ON Semiconductor]
ホームページ  http://www.onsemi.com
Logo 

 
 4 page
background image
NCP1212
http://onsemi.com
4
PIN FUNCTION DESCRIPTION
Pin
Name
Function
Description
1
FB
Feedback Input
This pin detects voltage feedback from output, can be connected directly to the
optocoupler collector pin.
2
BOK
Brownout Detect
with Hysteresis
This is the inverting input of the brownout detect comparator. The brownout detect
comparator has a detect threshold voltage of 1.21 V. This pin senses the voltage of the
bulk capacitor through a resistor divider network to determine the brownout event. The
hysteresis band is provided by a 45
mA current flows out of this pin to the resistor
network.
3
CS
Current Sense Input
During output on–time of the power switch, this pin receives a voltage proportional to
power switch current set by the current sensing resistor. The information is utilized to
terminate output switch conduction by PWM action or overcurrent limit circuitry.
4
CT
Programmed Oscillator
Frequency
Connecting a capacitor from CT pin to ground programs the internal oscillator frequency.
The oscillator can operate up to 200 kHz.
5
GND
IC Ground
6
DRV
Gate Driver Output
This is a high current totem pole output. The PWM driving control is provided by this pin.
The current and slew rate capability of this pin are suitable to drive a Power MOSFET.
7
VCC
Positive Supply to IC
This pin is the positive supply of the IC. The driver output gets disabled when the voltage
becomes higher than 25 V and the operating range is between 10 V and 25 V. The
startup voltage is set at 15 V.
8
SS/DMAX
Soft−Start Time
Programming and
Maximum Duty Cycle
Selection
This is a multi−function pin. Soft−start effect is provided during startup with a capacitor
connected to this pin. After soft−start period elapsed, the capacitor is used for timing
control to determine output overload. If only a capacitor is connected to this pin, its final
voltage is
X4.3 V and maximum turn−on duty cycle DMAX is set at 82%. Connect a
resistor in parallel with the capacitor can alter the final voltage of this pin. 48% DMAX is
selected if this pin stays at 2.1 V to 2.8 V after soft−start period.
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.)
Rating
Symbol
Value
Unit
Power Supply Voltage (Pin 7)
VCC
−0.3, 28
V
Input/Output Pins (Pins 1, 2, 3, 4, 8)
VIO
−0.3, 6.5
V
Gate Driver Output Pin (Pin 6)
VDRV
−0.3, 14
V
Power Dissipation and Thermal Characteristics
Thermal Resistance, Junction−to−Air, PDIP−8 Version
Thermal Resistance, Junction−to−Air, SOIC−8 Version
RqJ−A
100
178
°C/W
Output Current, Source or Sink
IDRV
1.0
A
Operating Junction Temperature Range
TJ
−40 to +150
°C
Operating Ambient Temperature Range
TA
−25 to +105
°C
Storage Temperature Range
Tstg
−55 to +150
°C
ESD Capability, HBM (All pins except VCC pin) (Note 1)
2.0
kV
ESD Capability, Machine Model (All pins except VCC pin) (Note 1)
200
V
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. This device series contains ESD protection and exceeds the following tests:
Human Body Model (HBM)
v2.0 kV per JEDEC standard: JESD22−A114.
Machine Model (MM)
v200 V per JEDEC standard: JESD22−A115.
2. Latchup Current Maximum Rating:
"150 mA per JEDEC standard: JESD78.




Html ページ

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22 


Datasheet Download



関連電子部品番号

部品番号コンポーネントの説明Html Viewメーカー
HV9605High Voltage Current Mode PWM Controller for ISDN Equipment 1 2 3 4 5 Supertex, Inc
ISL6235Advanced Triple PWM Only Mode and Dual Linear Power Controller for Portable Applications 1 2 3 4 5 MoreIntersil Corporation
SG6848Low Cost Green-Mode PWM Controller for Flyback Converters 1 2 3 4 5 MoreList of Unclassifed Manufacturers
LTC1871Wide Input Range No RSENSE Current Mode Boost Flyback and SEPIC Controller 1 2 3 4 5 MoreLinear Technology
SI9113High-Voltage Current Mode PWM Controller for ISDN Power Supplies 1 2 3 4 5 MoreVishay Siliconix
UCC1884Frequency Foldback Current Mode PWM Controller 1 2 3 4 5 MoreTexas Instruments
NCP1280Active Clamp Voltage Mode PWM Controller for Off-Line Applications 1 2 3 4 5 MoreON Semiconductor
AMC3842BCURRENT MODE PWM CONTROLLER 1 2 3 4 5 MoreList of Unclassifed Manufacturers
ICE3BS02LOff-Line SMPS Current Mode Controller with integrated 500V Startup Cell and Latched off Mode 1 2 3 4 5 MoreInfineon Technologies AG
UC1856Improved Current Mode PWM Controller 1 2 3 4 5 MoreTexas Instruments

リンク URL

ALLDATASHEETはお客様のビジネスに役立ちますか?  [ DONATE ]  

Alldatasheetは   |   広告   |   お問い合わせ   |   プライバシーポリシー   |   ブックマーク   |   リンク交換   |   メーカーリスト
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl